SolidCAM Room - Hall 7

Visit the future

During the two days, the SolidCAM Room will host specialized lectures and technical content from great speakers.

Highlight: Don’t miss Marc Vidal’s talk on the 17th from 12:00 to 12:45hs.

SolidCAM Room - November 17th

Official opening of the event

Presentation by Oscar Barranco, Divisional Director of Easyfairs Spain and Portugal.

ROOM 2 - Hall 7 10:00 to 10:30 a.m.

Presentation Plan de los Fondos Europeos Next Generation

Presentation of the Recovery plans that will contribute to repair the economic and social damages caused by the pandemic.

ROOM 2 - Hall 7 10:40 to 11:10 a.m.

The future of CAM, the revolution of CNC


Maria José Páez,  Country Manager en  SolidCAM Spain

Felipe Casado,  Técnico de aplicaciones en zona norte y Director de formación en SolidCAM Spain

Juan Ramírez, Técnico Especialista en Swisstype SolidCAM Global

ROOM 2 - Hall 7 11:20 to 11:50hs

Keynote Speaker - Marc Vidal

Marc Vidal is considered one of the most influential figures in Digital Economy in Spain and is known for his revolutionary method to increase sales in a spectacular way and to make unknown brands relevant through technological understanding. He is a specialist in Digital Transformation and Industry 4.0.

ROOM 2 - Hall 7 12:00 to 12:45hs

Critical raw materials, a strategy for Spain

Yolanda Moratilla, Chair of the Energy and Natural Resources Committee of the IIE, and Carlos López Jimeno, PhD in Mining Engineering from the Polytechnic University of Madrid, will give a presentation on critical raw materials for Spain.

ROOM 2 - Hall 7 12:55 to 13:25hs

Madurando la ciberseguridad en la industria

En esta charla se plantean y proponen diferentes tecnologías y servicios para mejorar la ciberseguridad en una industria, enfocándolas desde un punto lógico de impartición según el grado de madurez que pueda tener cada industria.

Room 1 - Hall 5 12:20 a 12:50hs

Presentation given by AECIM

Presentation of the Acelera Pyme plan, of the Ministry of Economic Affairs and Digital Transformation of the Government of Spain, which provides SMEs and self-employed with technological solutions aimed at maintaining the activity of companies and advancing in digital transformation processes.

ROOM 2 - Hall 7 15:30 to 16:00hs

Presentación del Plan Acelera Pyme, del Ministerio de Asuntos Económicos y Transformación Digital

Este plan del Gobierno de España pone a disposición de las PYMES y autónomos soluciones tecnológicas orientadas a mantener la actividad de las empresas y avanzar en procesos de transformación digital.

ROOM 2 - Hall 7 16:00 a 16:40hs

2022: La dinamización de la transformación industrial a través de la I+D y la innovación.

Leyton expondrá un resumen de los mensajes que recibe de sus clientes industriales y las barreras a las que se enfrentan.
Explicarán por qué el 2022 debe ser el año de la explosión de la 4ª revolución industrial en España y que es lo que proponen para lograrlo.

ROOM 2 - Hall 7 16:50 a 17:20hs

SolidCAM Room - November 18th

Presentation of the capabilities of HEFESTO multilayer fire and high temperature protection for CFRP, GFRP or general plastics structures.

The HEFESTO project is an innovation action approved by the European Commission in the framework of Clean Sky 2, within the European research program H2020. The project has been developed by the consortium formed by the Navarra Industry Association and SOGECLAIR aerospace S.A.

The initial objectives of HEFESTO as expressed in the proposal phase and in the grant agreement were the development of a multilayer coating and the demonstration of its ability to effectively thermally insulate and protect in fire conditions a composite structure (CFRP) to withstand the operating conditions and the risk of fire in the vicinity of a helicopter engine.

Translated with (free version)

ROOM 2 - Hall 7 10:00 to 10:30hs

Laser diode-based solutions for heat-assisted metal processing

Monocrom is presenting laser bar-based solutions for different types of material processing (selection). Starting with high-power direct-diode solutions made for spin- and roll-forming to increase yield and process accuracy. Especially for the latter these solutions can be used to tackle issues with crack forming and spring-back when it comes to form ultra-high strength steel sorts. Moreover, our solutions can be used at the end of the process to release the accumulated stress during the forming procedure to increase the accuracy and the compliance to customer demands. Similar diode laser bar-based systems can be incorporated into servo-press for stamping applications. Due to the localized and well controlled energy deposition, that causes a higher formability, we are able to extend the tooling life-cycle and thus, the up-time of your machine park. And last but not least, we are also serving spin-forming applications with our high-power, laser bar-based fiber coupled solutions. Besides these examples we are highly flexible to adapt our systems to our customers needs.

ROOM 2 - Hall 7 10:40 to 11:10hs

Success stories: Projects and equipment of trains with specific metallic materials. Advances by Embedding and 3d Laser in sheet metal forming.

Albert Pi, Technical Sales Director of MATRIÇATS, will be in charge of the presentation.

ROOM 2 - Hall 7 11:20 to 11:50hs

La acreditación como herramienta de apoyo en la cadena de suministro

En una cadena de suministro es fundamental garantizar el control, un proceso crítico que impacta directamente en la actividad de las empresas en materia de costes, seguridad de los productos y credibilidad en el mercado. Para que este control sea realmente efectivo, las empresas deben tener la seguridad de que los suministros que reciben cumplen las especificaciones y requisitos que la propia empresa o la reglamentación haya establecido. Así, la empresa deberá evaluar y controlar de una u otra forma al proveedor o al suministro, ya sea con sus propios medios o mediante el uso de empresas externas de evaluación y control, y que principalmente son laboratorios, entidades de certificación y entidades de inspección.

En este sentido, es fundamental que la información que aportan los evaluadores a las empresas sea fiable y creíble, ya que va a ser la base para tomar decisiones críticas.

ROOM 2 - Hall 7 12:00 a 12:30hs

New innovation community to transform Europe's manufacturing industry

Panel discussion offered by EIT Manufacturing in which all the company’s services and success stories will be presented.

SALA 2 - Pabellón 7 12:40 a 13:15hs


Block on surface treatment. Contents to be confirmed

ROOM 2 - Hall 7 15:30 to 18:00hs


Block on surface treatment. Contents to be confirmed

ROOM 2 - Hall 7 15:30 to 18:00hs