Split cable entry system for routing and sealing cables with connectors, providing an IP66 / UL Type 12/4X* rating and strain relief for cable diameters from 1 to 16 mm (single-hole grommets KT 1 - 15) and 13 to 35 mm (single-hole grommets KTG 13 - KT 34). The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly. The KEL-ER frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The KEL-ER-B frame matches the cut-out dimensions of 46 × 46 mm measuring instruments. The single-row versions KEL-ER-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space. Thanks to the injected seal and the use of single grommets, the KEL-ER series achieves protection class IP66. If the flange surface is roughly structured or slightly uneven, we recommend installing the additional flat rubber gasket included in the shipment.

Parallel keys according to DIN 6885A, in C45, AISI 316Ti, and AISI 304 materials. Equivalent standards: NFE22177. Forms AB and B, upon request. Woodruff keys DIN 6888. Equivalent standards: NFE22179. Special keys available upon request.

Tecnodin has a wide selection of standardised keys and keys profiles in different shapes and materials and with the most common standards such as DIN 6885A and DIN7979D. All keys are protected with a light layer of anti-rust oil so they can be handled without gloves. We also have a wide range of dowel pins, conical pins, cylindrical pins, pins with internal thread, etc. We manufacture special sizes in different materials.

Inside our catalog, you will find a wide selection of standard keys that range from finished parts with different forms, standards and materials to calibrated profiles used to make them. We can also supply any type of key that you cannot find in the current catalog by creating special keys that can range from a single unit or small series to medium and large series. Since we specialize in this product, we are permanently stocked with keys made with different materials like steel and stainless steel.

Content: Parallel Key Bars: 3x3x400 (1u) 4x4x400 (1u) 5x5x400 (1u) 6x6x400 (1u) 8x7x400 (1u) 10x8x400 (1u) 12x8x400 (1u) 14x9x400 (1u) 16x10x400 (1u) 18x11x400 (1u) 20x12x400 (1u) Keys: 3x3x15 (25u) 4x4x15 (25u) 5x5x20 (25u) 6x6x30 (25u) 6x6x40 (25u) 6x6x70 (10u) 8x7x30 (20u) 8x7x40 (25u) 8x7x100 (5u) 8x7x50 (20u) 10x8x50 (20u) 10x8x100 (5u) 12x8x50 (10u) 12x8x100 (5u) 14x9x70 (10u) 14x9x100 (5u)

Content: Keys: 3x3x25 (20u) 4x4x32 (20u) 5x5x40 (20u) 6x6x30 (20u) 6x6x40 (20u) 6x6x70 (10u) 8x7x50 (20u) 8x7x100 (5u) 10x8x50 (20u) 10x8x100 (5u) 12x8x50 (10u) 12x8x100 (5u) 14x9x70 (10u) 14x9x100 (5u)

Airtech’s additive manufacturing portfolio continues to grow with the addition of the Kimya by Airtech filament range, with over 30 different formulations. This new offering complements our existing Dahltram® filaments and pellet resins, allowing us to support an even wider range of applications.

Introducing the most powerful line of electric sprayers in the industry! Designed for large-scale jobs, this product line delivers unmatched performance on the toughest coatings and features innovative functions that reduce downtime.

Graco airless pumps have been the industry’s preferred brand for over 60 years. If you’re looking for a reliable, durable, and robust single-component protective coating pump to get the job done, Graco is the right choice.

HEINRICH KIPP WERK offers a wide range of handles, knobs, handles and handles for the industry. Its different morphologies allow to adapt to any application (T-shape, star, triangle, etc.) and always offer maximum ergonomics. Manufactured in a variety of materials: stainless, plastic, aluminum ... and the NATURE gray series made of environmentally friendly biopolymers. In addition, these standardized elements adapt to different regulations such as DIN, RoHS, sanitizable versions ... A wide range of versatile and competitive solutions. If you want more information, come and meet us at MetalMadrid 2019 or, if you prefer, call us at 902 36 15 02

HEINRICH KIPP WERK offers a wide range of handles, knobs, handles and handles for the industry. Its different morphologies allow to adapt to any application (T-shape, star, triangle, etc.) and always offer maximum ergonomics. Manufactured in a variety of materials: stainless, plastic, aluminum ... and the NATURE gray series made of environmentally friendly biopolymers. In addition, these standardized elements adapt to different regulations such as DIN, RoHS, sanitizable versions ... A wide range of versatile and competitive solutions. If you want more information, come and meet us at MetalMadrid 2019 or, if you prefer, call us at 902 36 15 02

KIPP hinge safety switches are used to control the position of protective doors, fairings and rotating protection covers. The control of the protective device is carried out directly inside the hinge. The switching angle can be adjusted throughout the entire service range. A mounting aid facilitates quick adjustment in doors and frames. The additional hinges look the same and the same measures as the hinge safety switches. This product is especially suitable for protecting swing doors, especially in standard aluminum profiles. Its ease of assembly and integration in the structure allow a comfortable installation while its protection against manipulations and minimal mechanical wear guarantee safety throughout its long service life. If you want more information, come and meet us at MetalMadrid 2019 or, if you prefer, call us at 902 36 15 02

KIPP hinge safety switches are used to control the position of protective doors, fairings and rotating protection covers. The control of the protective device is carried out directly inside the hinge. The switching angle can be adjusted throughout the entire service range. A mounting aid facilitates quick adjustment in doors and frames. The additional hinges look the same and the same measures as the hinge safety switches. This product is especially suitable for protecting swing doors, especially in standard aluminum profiles. Its ease of assembly and integration in the structure allow a comfortable installation while its protection against manipulations and minimal mechanical wear guarantee safety throughout its long service life. If you want more information, come and meet us at MetalMadrid 2019 or, if you prefer, call us at 902 36 15 02

HEINRICH KIPP WERK offers a wide range of quick clamping devices and clamping levers for industry. Reinforced tightening with minimal effort, durability and reliable and ergonomic operation are the hallmarks of these series of products. KIPP offers quick clamps in both horizontal and vertical mounting versions. This range also includes connecting rod clamping devices, cup clamping devices and hook clamping devices. This variety of solutions and morphologies is available in galvanized and stainless steel for the most demanding applications. Its robust construction guarantees great resistance to wear and tear and a long service life, during which the following added values ​​will stand out: - Low manual effort to obtain high clamping forces - Optimal stability - When opening and closing a constant force is exerted without variations. Enhanced grip levers, safety and ergonomics - KIPP has developed new clamping levers with a safety feature that prevents accidental opening or closing. The clamp is not released or tightened until the handle lever is pressed. The closed handle contour and no interfering edges make these clamping levers ideal for medical and laboratory equipment due to their easy disinfection and cleaning. The sum of these characteristics makes these products a successful choice for many sectors such as industrial machinery, tools, toolings, medical equipment, transport, etc. If you want more information, contact us or, if you prefer, call us at 902 36 15 02

HEINRICH KIPP WERK offers a wide range of quick clamping devices and clamping levers for industry. Reinforced tightening with minimal effort, durability and reliable and ergonomic operation are the hallmarks of these series of products. KIPP offers quick clamps in both horizontal and vertical mounting versions. This range also includes connecting rod clamping devices, cup clamping devices and hook clamping devices. This variety of solutions and morphologies is available in galvanized and stainless steel for the most demanding applications. Its robust construction guarantees great resistance to wear and tear and a long service life, during which the following added values ​​will stand out: - Low manual effort to obtain high clamping forces - Optimal stability - When opening and closing a constant force is exerted without variations. Enhanced grip levers, safety and ergonomics - KIPP has developed new clamping levers with a safety feature that prevents accidental opening or closing. The clamp is not released or tightened until the handle lever is pressed. The closed handle contour and no interfering edges make these clamping levers ideal for medical and laboratory equipment due to their easy disinfection and cleaning. The sum of these characteristics makes these products a successful choice for many sectors such as industrial machinery, tools, toolings, medical equipment, transport, etc. If you want more information, contact us or, if you prefer, call us at 902 36 15 02