Stereolitography is an additive manufacturing technology, by which we obtain epoxy resin parts with a good dimensional tolerance, usually with acceptable mechanical properties. Stereolithography is the most appropriate technology to manufacture the master piece used to create silicone moulds or prototypes that verify the geometry and visual appearance of the product.

SAGI CONSUMABLES SCREWS Controls the needs for high-rotation screws or consumables. Identifies the operator, automates replenishment requests. Achieve correct warehouse management and avoid stock breakage.

The storage system for bar remains is used for the storage of short materials (remains, tips, leftovers). It consists of modules (or trays), which can vary in height and width depending on the type of configuration chosen. Each storage location has a mobile system in the form of a tray, where the material to be stored is placed. The extraction and introduction of material in each box can be done both manually (For small loads) and by the help of automatic lifting elements that allow the extraction of the material. The trays are equipped with steel ribbons at the bottom every 50 cm to store the material completely flat and allow it to be picked up through the gaps with the slings with ease.

Sheet metal storage system whose objective is to optimize the storage space. Each shelf of your UPMOVIOM storage system can be configured to store packages from 1000kg to 3000kg per shelf, with total heights of between 1.8 and 3 meters responding to your needs. In adition, this system can be motorized for automatic extraction of each tray.

With TRUMPF storage and logistics systems, you have a system of intelligent modules for warehouse solutions at your disposal. They save you space, time and money.

DetasUltra AP series cable management and fixing systems are used in electrical cabinets or panels to help secure and organize cables. They are also used to comply with EN62444. Cables can be fastened with standard cable ties or Velcro ties and can also be installed for two-level applications. The different types of cable fixing and routing systems available are as follows: -Cable fixing and routing plates for DIN rails. -Fixing and cable routing plates for screw mounting -Separators -Cable clamps -Cable clamps

mprima piezas grandes de hasta un metro de longitud con una impresora 3D de formato grande y asequible.

In strip, we manufacture all kind of coil springs with special pin, holes or any type of anchor. We also manufacture all kinds of pieces in strips with Special formed from thicknesses of 0.20 mm to 3 mm in widths from 2 mm to 60 mm.

Disponemos de una gran cantidad de accesorios para la mesa de soldadura en cada aplicación específica: abrazaderas o abrazadera para tubo, bridas de sujeción, elementos de elevación, pata adicional, diferentes tipos de alicates como, por ejemplo, alicates de cadena, y muchos más. BuildPro ha diseñado accesorios y elementos dentro de cada industria de producción para poder fijar o mover cada pieza específica dentro de la mesa de soldadura. Los usuarios pueden colocar los componentes en cualquier punto sobre la mesa como se requiere para cada proyecto. En general, para un trabajo adecuado, contar solo con una mesa de soldadura no es suficiente. Si queremos hacer un trabajo de soldadura en las mejores condiciones de calidad y seguridad, necesitamos rodearnos de los accesorios para mesa de soldadura que contribuirán a mejorar dicha calidad y seguridad. Encuentra en nuestro catálogo los diferentes accesorios para mesa de soldadura con los que contamos, y solicita la información que necesites oportuna.

The Estrubolt rivet provides the highest tensile and shear resistance on the market, thanks to its locking system it guarantees solidity in applications that support vibrations and prevents the passage of water in exterior applications. The Bralo Estrubolt Rivet is a larger fixation than a standard rivet, which gives it the highest resistance on the market. A system designed for demanding applications such as military vehicles, train wagons, tracks, bridges, vehicle suspension… This rivet is the alternative to threaded fasteners and welding since its installation is easy and fast for the operator, and a long-lasting and highly reliable riveting is achieved. Thanks to BRALO riveting tools, the user safely achieves professional riveting of the highest quality. Special for fragile materials thanks to its wide head support area. Allows single-sided access; stem head retention system by mechanical blocking, creating a joint resistant to vibrations and the passage of water. All this with the use of simple, fast and professional tools. High security using simple, fast and professional tools. Available in diameters of 6 - 4 - 7 - 9 - 9.5 - 12.7 - 16 and 19.

Bralo Structural Rivet is designed to fix elements where a high resistance to both tensile and shear strengths are required. This fastener has been designed for heavy-duty fastening applications and ensures a quality fastening. Due to its feature of adaptive expansion, the same size can be used for different thickness. This rivet guarantees a homogeneous riveting whatever the thickness, and ensures the locking of the mandrel inside the head, obtaining thus a great tightness.

Structural fasteners are a key element in construction and engineering applications. These fastening components, which include bolts, nuts and washers, are designed to withstand heavy loads and extreme conditions. They are made of high-quality materials, such as carbon steel, to ensure strength and durability. Structural hardware is available in a variety of sizes and specifications to meet the needs of every project. Whether you are constructing bridges, buildings or critical infrastructure, structural fasteners offer the safety and reliability you need. Choosing the right structural fasteners can have a significant impact on the safety and longevity of projects.

Presentation of the range of structural rivets Remaches Tudela