Este set de 2 filtros tipo A1P3 ha sido diseñado para ofrecer una protección respiratoria completa frente a gases, vapores orgánicos y partículas sólidas y líquidas, siendo el complemento ideal para la máscara Cofan con ref. 11002130. Cada filtro está compuesto por dos elementos combinados: · Un filtro contra gases y vapores (tipo A1), alojado en una carcasa de material plástico diseñada para favorecer un flujo de aire óptimo. · Un filtro de partículas P3, ensamblado sobre el filtro de gases, que proporciona una protección eficaz frente a partículas sólidas y líquidas, incluyendo los humos de soldadura. La unión del filtro a la mascarilla se realiza mediante un sistema de conexión tipo bayoneta, que garantiza un acoplamiento rápido, seguro y estanco, evitando montajes incorrectos y mejorando la seguridad del usuario. El filtro A1P3 ofrece una alta capacidad de protección, con ensayos realizados a 1000 ppm y un caudal de 15 l/min, así como un rendimiento satisfactorio en resistencia a la inhalación tanto a 15 l/min como a 47,5 l/min. El filtro P3 cumple con los ensayos de penetración de partículas líquidas y resistencia respiratoria, asegurando una protección eficaz en entornos industriales exigentes. Set adecuado para trabajos de soldadura, industria, mantenimiento, pintura, manipulación de productos químicos y atmósferas contaminadas, siempre que el contenido de oxígeno sea adecuado.

Professional stool for the industry. -Made of aluminum. -60x25 cm metal steps. -Wheels for easy transport in SGAS03 and SGAS04 models. -Reinforcement cross. -Stabilizer.

Shaft-hub clamping sets from norelem form a frictional connection between a shaft and hub. Generally, they are designated as standard connection elements in machine construction. Their task is to transfer torque and power from a rotating shaft to a hub, or visa-versa. They can also be used to transfer other forces such as axial or transverse forces, such as those that occur with gearwheels or toothed pulleys. Keyless locking couplings have a very low moment of inertia, which means that they can react very quickly to rotation movements. They also require only a minimum of space. Installation and dismantling is carried out easily and quickly with a central nut. In addition to stainless steel versions, norelem also offers keyless locking couplings in eight different forms.

Frictional shaft-hub-connections are standard machine elements used to connect shafts and hubs. They are capable of transmitting torque,, axial forces, radial forces and bending moments. ✅ Advantages of frictional shaft-hub-connections: • Backlash free connections • Ideal for reversing operation • Simultaneous transmission of torque and axial force • Easy alignment of hub to shaft • Compact solution due to high power density • Reduced costs due to simple shaft and hub geometry • Connections can be released even after long operation time. 📫 info@ringspann.es ☎️ +34 945 22 77 50 🖥 www.ringspann.es Subsidiary for Iberia of the German-based RINGSPANN Group.

Main applications in the metallurgical industry - Chip and machining waste management: In machine tools (lathes, milling machines, CNC machining centers), shaftless spirals are perfect for evacuating metal chips. Long, stringy chips would easily wrap around the shaft of a standard screw conveyor, causing jams and machine downtime. - Industrial wastewater and sludge treatment: Foundries and metallurgical industries generally produce heavy sludge and wastewater loaded with residues (e.g., cooling liquids and emulsions mixed with metal dust). Shaftless spirals excel at transporting these dense, sticky sludges to filtration and water purification systems. - Handling of blanking and stamping scraps: They are used to remove sharp, irregular waste coming from stamping presses or sheet metal cutting processes. - Conveying of scale and powders: They are useful for handling highly abrasive materials, such as rolling scale, mill scale, or waste metal powders.

SHARK 230-1 NC HS 5.0, dual-column electrohydraulic automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cycle, it can also operate in semi-automatic mode.

SHARK 282 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate with manual and semi-automatic/dynamic modes.

SHARK 460 KONNECT, dual-column electromechanical automatic band sawing machine for 0° cuts of structural, stainless and alloy steels, solids and profiles. In addition to the automatic cutting cycle, it can also operate in semi-automatic mode.

The SHARK range of plasma cutting equipment is the result of very considerable investments of capital and resources dedicated to research. SHARK equipment is fitted with new technology torches, which have greatly contributed to a remarkable increase of both quality and speed throughout the entire cutting process. Quality is clearly reflected in neat cuts, lack of dross, minimal heat-affected zone and sufficiently squared edges. SHARK power sources represent an efficient solution for the cutting of any metal and perforated lamination sheets. Electronic control, coupled with inverter precision and flexibility, always provides the most correct parameters in order to obtain the highest quality cut depending on the thickness and type of material being cut. SHARK range new SK torches for manual cutting and SKM for CNC automation allow cuts without high frequency for arc striking, thus reducing external disturbances to the environment. SHARK power sources, powerful and fitted with professional high flow air circuit, ensure perfect cuts. • Electronic control for excellent cutting quality • Professional high flow air circulation • Pilot arc torch • Possibility of cutting grates and perforated lamination sheets • Possibility of contact cutting with currents lower than 50 A, without any guiding device or other spacers. • Regulator group with built-in filter and air impurity automatic expulsion • Easy to read and adjust sloping front control panel, highly visible from any direction • Metallic main structure with shockproof fibre compound front frames and control panel protected against accidental impact • Electrical protection device on the torch to ensure operator’s maximum safety

Our folding area has 4 machines (1/3/6/12 meters), offering the possibility of folding up to 12 meters. 12 maximum fold (m)

At Lasertek we cover the needs of small and medium-sized companies that require a fast, simple and affordable sheet metal folding service. We have a new state-of-the-art automated folding system Trubend Cell 7000, the fastest part folding Deula cell in the world. Automatic and faster production Automatic tool change Exact angles Specialized in medium batches and of course long series. We also put at your disposal three Trubend folding machines that work with plates up to 3 m in length and up to 130 tons, and that achieve perfect finishes when folding metals such as carbon steel, stainless steel and aluminum, and a Trubend 5000 series 5230, 280 Ton folding machine, with which we fold up to 4m with the possibility of thicker thicknesses. In addition, with our new electrically driven precision folding machine, greater accuracy and speed are achieved in folds, and the six axes of the stop make it easier to fold complex parts. Ask us and we will give you the solution that best suits your sheet metal bending needs.