Save time, save your bearings and improve plant reliability. The 4Cast is a permanently installed smart alert system that monitors bearing conditions by recording data and sounds 24/7. This device is perfect for critical equipment and slow-speed bearings, while also allowing you to set low -and high-level alarms and simultaneously send data and sound samples to specialized software for analysis and reporting, providing important information to determine the health of your bearings. Why choose 4Cast?  24/7 Condition Monitoring - Permanently installed transducers monitor bearing condition 24/7 - Low- and high-level alarms can be triggered should condition change - Sends recorded data and sound samples directly to DMS software Customization and Flexibility - Inspectors can schedule condition sampling by minutes, hours, days, etc. - Customized alarm levels - Customized reporting and analysis intervals Monitors up to four bearings Works together with Remote Access Sensors Highly Flexible Ethernet Connection Slow-Speed Bearing Inspection The 4Cast truly has you covered!

Gama completa en niveles de burbuja, cuchillos, cutters y amplia gama en iluminación.

Online Monitoring Solutions for Critical Electric Transmission and Distribution Equipment The 4Site is an online monitoring solution for electrical transmission and distribution designed to reduce data overload by only transmitting optimized data. It continuously listens for the first signs of higher frequency sounds produced by arcing, tracking, and corona. These sounds are then analyzed through ultrasound spectrum analysis software. 24/7 Online Monitoring - The 4Site continuously listens for first signs of corona, arcing, and tracking - Safer and easier monitoring Optimized Data - Only transmits data that could be early signs of failure - Reduces data overload Designed to monitor up to 4 locations simultaneously Scalability Safely monitor your electrical equipment with the 4Site!

Organize your lifting accessories with 5Sling, the ideal system for storing slings and chains. Organize your lifting accessories with 5Sling, the ideal system for storing, organizing, and keeping slings and chains clean and organized. The 5Sling family of lifting equipment accessory organization products from PAI Applications Industry facilitates the incorporation of 5S methodologies in workplaces where overhead cranes are used. By promoting cleanliness and organization, it helps prevent errors and reduces the time spent correcting them. Storage without damaging accessories with adjustable individual spaces. Features: - Multi-configuration system - Fixed or mobile location - Suitable for slings, cables, chains, and any other slinging accessory - Individual identification of each item

Self-tightening double-ended wrench for hex bolt or nut heads with wrench sizes 13-16 and 16-13 (metric) or 1/2"-5/8" and 5/8"-3/4" and 7/16"-8/16" (inch). The continuously parallel-guided jaws replace several individual open-end wrench sizes. The wrench automatically finds the required size when positioned on the nut or bolt. The integrated lever mechanism securely grips the bolt or hex nut between the jaws, significantly reducing the risk of slipping and the resulting damage. The ratchet function enables fast, uninterrupted tightening. The use of prismatic angles allows for a return angle of just 30°. The ratchet function and the angle prism allow for efficient work even in very tight installation spaces. The Joker 6006 adjustable double-ended wrench with ratchet function is the classic universal tool. Self-adjusting. Powerful. With a ratchet function.

Self-adjusting double-ended wrench for hex bolt or nut heads with wrench sizes 7-10 and 10-13 (metric) or 1/4"-3/8" and 7/16"-8/16" (inch). The continuously parallel-guided jaws replace several individual open-ended wrench sizes. The wrench automatically finds the required size when positioned on the nut or bolt. The integrated lever mechanism securely grips the bolt or hex nut between the jaws, significantly reducing the risk of slipping and the resulting damage. The ratchet function enables fast, uninterrupted screwdriving. The use of prismatic angles allows for a return angle of just 30°. The ratchet function and the angle prism allow for efficient work even in very tight installation spaces. The Joker 6006 adjustable double-ended wrench with ratchet function is the classic universal tool. Self-adjusting. Powerful. Ratcheting.

Llave dinamométrica mecánica de disparo ajustable con visor y cabeza de carraca fija con cuadradillo pasante.

Order no. 600580000 EAN 4007430201737 Rated input power 750 W Output power 470 W Drill Ø steel 16 mm Drill-Ø soft wood 50 mm No-load speed 0 - 660 rpm Revolutions at rated load 350 rpm Gears 1 Maximum torque 75 Nm Collar diameter 43 mm Chuck capacity 1,5 - 13 mm Drill spindle with hexagonal recess 6,35 mm Drill spindle thread 1/2 " - 20 UNF Weight (without power cable) 2,6 kg Cable length 4 m Robust die cast aluminium gear housing for optimum heat dissipation and durability • Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws • Vario (V)-Electronics for working at customised speeds to suit various application materials • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly • Spindle with hexagonal recess for screwdriver bits for working without chuck • Suitable for powerful drilling of larger diameters and for stirring thick, liquid-like materials

• The torque setting adapter PowerX3 triples the power of the tool for extreme applications • Suitable for drilling with large diameters and for heavy screw jointing in wood without pre-drilling • Metabo "Quick" System: quick change of tool holder and bits for flexible working • Robust die cast aluminium gear housing for optimum heat dissipation and durability • Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws • Vario (V)-Electronics for working at customised speeds to suit various application materials • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly • Forward and reverse rotation • Spindle with hexagonal recess for screwdriver bits for working without chuck Order no 600585800 Rated input power 750 W Output power 470 W Drill Ø steel 16 mm Drill-Ø soft wood 50 mm No-load speed 0 - 660 rpm Revolutions at rated load 350 rpm Gears 1 Maximum torque 75 Nm Collar diameter 43 mm Chuck capacity 1,5 - 13 mm Drill spindle with hexagonal recess 6,35 mm Weight (without power cable) 2,6 kg Cable length 4 m

VDE-insulated torque screwdriver handle with 9 mm hex socket; exclusively for Wera Kraftform Kompakt VDE interchangeable blades. For professional screwdriving and fine-tuning, as well as for torque-controlled screwdriving. A torque function with non-overstepping limit for clockwise and counterclockwise tightening. With five selectable clockwise/counterclockwise torque settings (0.4; 0.8; 1.2; 1.6; 2.0 Nm) that can be set extremely quickly. A fixed position (Torque Lock) for unlimited tightening and loosening torques. With free-running sleeve for secure tool guidance during screwdriving.

Carracas de cabeza tipo pera reversible de 1/2" con 80 dientes y un ángulo de acción de 4,5°.

Translas TIG Extractors protect the welders and other workers in the factory from harmful fumes and metals like Aluminium, Chromium, Iron, Manganese and Nickel are possibly released during the welding process. The 8TE TIG Extractor handle has a unique ergonomic shape designed to suit the shape of the welder’s hand, fitting perfectly between the thumb and index fingers. The grip is made out of a durable but soft 2K TPE rubber. Both the ergonomic shape and the grip material contribute to the excellent stability of the torch during the welding process. The ClearO2 T100 / T200 portable extraction units offered by Translas were specially engineered to work with the 8TE Extractor to deliver the best results - up to 95% extraction of welding fumes directly at the source.

The 8XR Cobot MIG Extractor integrates one of the most efficient fume extraction structures in the welding industry. The torch comes with four different angles 22°, 35°, 45° and straight. The 8XR Cobot MIG Extractor, combined with the ClearO2 W-series 100 and 200, captures up to 98% of welding fumes directly at the source. The 8XR Cobot MIG Extractor provides one of the safest and most effective solutions for welders and workers to breathe CLEAN AIR and better work environments and works with the UR5e, UR10e & UR16e Universal Robot’s. -HOW DOES IT WORK? The 8XR MIG Extractor is specially made for Cobot and Semi-Automatic solutions. The 8XR is robust and the unique nozzle design combined with the ClearO2 W-series 100 and 200 provides the best results in taking away the fumes directly at the source. The specially designed nickel-plated contact tips are designed for a longer lifetime. The contact tips are available for all types of wire and sizes. The 8XR cobot works on the UR5e, UR10e and UR16e Universal Robot’s.