NORTON offers the widest range of wheels for cutting and grinding designed to meet all requirements of industrial customers.

Materials: Aluminum Oxide / Silicon Carbide / Zirconium. Sizes: 115 mm Grits: 40 - 60 - 80 - 120 Max. RPM: 13300 Application: For sanding wood and ferrous materials, stainless steel, iron, granite, glass and stone.

High-performance structural rivet designed with a grooved mandrel that ensures uniform expansion during installation. This feature provides excellent hole fill, even in irregular or slightly oversized drill holes, significantly enhancing anchoring strength. Thanks to its ability to absorb vibrations and maintain a secure joint under demanding mechanical conditions, the Multilock rivet is a reliable solution for critical applications where durability and safety are essential. It can be installed from one side only, making it ideal for assemblies with limited access. Available in 4.8 mm and 6.4 mm diameters, it comes in a variety of body, mandrel, and head combinations to suit different materials and technical requirements. It is particularly suitable for industries such as automotive, HVAC, industrial machinery, home appliances, and metal construction, where strong, stable, and long-lasting fastening is required.

The “BT” model JAGUAR multiposition clamps is equippe d with an articulated lifting ring for lifting, turning over or vertically tr ansporting steel plates whilst maintaining total gripping force on the opening, · The lever-activated safety closing device located on one side of the device makes it easier to grip the load without any hassles. · The lever, fitted with a strong spring, keeps the load safely blocked even when supported and there is no tension in the ring.· The jaws are made of tempered steel, with a toothed surface. They grip the part to be transported in apositive and effective manner,thereby obtaining the optimum results.· The hardness of the steel plates tobe lifted should not be higher than HRC 37 (HB- 345). The minimum work load should not belower than 7.5% of the maximum workload. The lifting capacity and opening areetched sideways on the body.

Our Multigrip rivet is synonymous with versatility. Just with three sizes, Bralo Multigrip Rivet covers a gripe range of 1 to 20 mm. Consequently, a single rivet can be used to replace several standard rivets, reducing thus the rivets inventory. Due to its fastening feature of wide expansion on the blind side, the load and torque forces are well distributed. It is, therefore, especially suitable for working with plastics and thin metal sheets and it is often used for repairing. Bralo Multigrip Rivet ensures a homogeneous fastening, a firm and high quality joint that is resistant to all kinds of vibrations. Furthermore, when properly fastened, it provides a tight seal against weather conditions.

V-factory's IoT concept favours a direct response service through visualising entire connected production. A state of the art monitoring and control system that allows you to visualize the entire connected manufacturing environtment. Anytime, Anywhere. With just a smart device and internet connection. The availability of machine diagnostic data enables early identification of problems and reduced machine downtime.

Plates that sell. The best way to promote your sales is your own product. Our nameplates are designed to help develop your brand image or corporate image by providing information of your company’s name, logo, slogan, address, web site, qr code etc. We offer a wide variety of finishes suiting the most demanding design requirements and conditions of exposure. Our nameplates remain unalterable over the years. In addition to any customer-specific designs, we have a considerable stock of dies and can therefore offer you, nameplates in many different standard shapes and sizes.

Las naves de estanterías (autoportantes) de OHRA unen perfectamente la funcionalidad de edificación necesaria con la tarea de una instalación de estanterías convencionales. Las columnas y bastidores sirven como elemento de soporte para el techo y la pared. Por eso no es necesario construir edificaciones - naves. La posibilidad de realizaciones individualizadas, permiten la adaptación a sus necesidades de almacenaje. La planificación, construcción, fabricación, entrega y el montaje hasta la solicitud de la construcción de una sola vez.

The NEOCUT 105 is a plasma cutter with a duty cycle of 100% at 105 A for cutting work up to 50 mm thick in industrial environments. It is equipped with automatic air pressure management, in all modes, offering optimum cutting quality throughout the lifespan of the consumables. Can also be connected to a cutting table, its «Marking» mode is perfect for tracing and identifying parts. SYNERGISTIC AIR PRESSURE Automatic management of pressure and air flow rate whatever the torch length and the operating mode (cutting, gouging and marking) Optimised consumable lifespan MAXIMUM PRODUCTIVITY Duty cycle 100% A at 105 A (40°C). Marking mode, ideal for tracing and identifying parts. Cuts all material types (mild, stainless, tempered, HLE), aluminium, copper, etc. Optimized cooling design to operate in an industrial environment. Connectable via an optional CNC kit for use on an automated cutting table. Reinforced structure IP 23. SIMPLE TO USE User friendly interface with OLED display (7 languages). 6 modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger, Cutting of perforated sheets, Marking. Meter for checking the wear of the consumables (tip and electrode). Pneumatic diagnosis (moisture presence test and compressor control). HF-free ignition to prevent disturbances that could damage nearby electronic equipment. Simplified software update via USB cable without any tools or disassembly. HIGH-PERFORMANCE TORCH Premium torch available in 2 lengths and 2 shapes (manual and straight for automation) Large choice of consumables adapted to all thicknesses. Designed to be shock and heat resistant. Quick connection/disconnection of the torch, no tools required for transport or maintenance. Easy to use trigger mechanism for added comfort.

The NEOCUT 125 is a plasma cutter with a duty cycle of 100% at 125 A for cutting work up to 57 mm thick in industrial environment It is equipped with an automatic air pressure management, in all modes, offering an optimum cutting quality throughout the lifespan of the consumables. Also connectable to a cutting table, its «Marking» mode is perfect for tracing and identifying parts SYNERGIC AIR PRESSURE Automatic management of pressure and air flow independent of the torch length and the operating mode (cutting, gouging and marking) Optimised consumable lifespan MAXIMUM PRODUCTIVITY Duty cycle 100% at 125 A (40°C). Marking mode, ideal for tracing and identifying parts. Cuts most materials (mild, stainless, tempered, HLE), aluminium, copper, etc. Optimized cooling design to operate in an industrial environment. Connectable through one of the 3 optional CNC kits for use on automated cutting table. Reinforced case IP 23. SIMPLE TO USE Ergonomic interface with OLED screen (7 languages). 6 working modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger, Cutting of perforated sheets, Marking. Counter to follow the wear of the consumables (nozzle and electrode). Pneumatic diagnosis (moisture presence test and air pressure control). HF-free arc ignition to prevent disturbances that could damage nearby electronic equipment. Simplified software update via USB cable without any tools or disassembly. HIGH-PERFORMANCE TORCH Premium torches available in 2 lengths (6 m / 12 m), 2 types (manual / automatic) and 2 powers for automated cutting (125 A / 160 A). Large choice of consumables adapted to all metal thicknesses. Designed to be shock and heat resistant. Quick connection/disconnection of the torch, without tools required for transport or maintenance. Easy to use trigger mechanism for more comfort.

Designed to work exclusively with NEOPULSE power sources, the separate NEOFEED 4W wire feeder allows for very precise configuration and control of the welding cycle. Its intuitive digital interface makes it easy to act on the welding parameters. Its ultra-precise drive system offers industrialists maximum productivity on all types of materials.

The NEOMIG-i 400 G is a three-phase, multi-process power source with separate wire feeder. Its advanced digital technology and 100% duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies make set-up considerably easier, and reduce spatter during welding. When equipped with the WF wire feeder, the machine offers precise control of the welding parameters in order to deliver the best possible results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (polarity reversal) : Ø 0.9 to 2.4mm MMA DC / Pulse: basic, rutile and cellulosic electrodes. TIG DC Lift / Pulse. Air-arc gouging. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. PREMIUM WELDING High duty cycle of 100% at 400A. Digital arc control with instantaneous ignition. Very stable arc which helps to reduce welding spatter. Compatible with WF 35 and WF 50 wire feeders. MAXIMUM CONNECTIVITY Traceability of all weld beads according to EN 3834. Calibration mode for welding accessories in order to amend the voltage displayed. Connectable via an optional kit (062993) for use with robotic systems. User mode to share the product between multiple operators. Free online tool to customise the interface. Compatible with KOOLWELD 2 cooling unit (075115). Optional Push-Pull torch connection (078741) for WF 50 wire feeder

The NEOMIG-i 500 G is a three-phase, multi-process power source with separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies make set-up considerably easier, and reduce spatter during welding. When equipped with the WF wire feeder, the machine offers precise control of the welding parameters in order to deliver the best possible results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (polarity reversal) : Ø 0.9 to 2.4mm MMA DC / Pulse: basic, rutile and cellulosic electrodes. TIG DC Lift / Pulse. Air-arc gouging. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. PREMIUM WELDING High duty cycle of 60% at 500A. Digital arc control with instantaneous ignition. Very stable arc which helps to reduce welding spatter. Compatible with WF 35 and WF 50 wire feeders. MAXIMUM CONNECTIVITY Traceability of all weld beads according to EN 3834. Calibration mode for welding accessories in order to amend the voltage displayed. Connectable via an optional kit (062993) for use with robotic systems. User mode to share the product between multiple operators. Free online tool to customise the interface. Compatible with KOOLWELD 2 cooling unit (075115). Optional Push-Pull torch connection (078741) for WF 50 wire feeder