The NEOCUT 105 is a plasma cutter with a duty cycle of 100% at 105 A for cutting work up to 50 mm thick in industrial environments. It is equipped with automatic air pressure management, in all modes, offering optimum cutting quality throughout the lifespan of the consumables. Can also be connected to a cutting table, its «Marking» mode is perfect for tracing and identifying parts. SYNERGISTIC AIR PRESSURE Automatic management of pressure and air flow rate whatever the torch length and the operating mode (cutting, gouging and marking) Optimised consumable lifespan MAXIMUM PRODUCTIVITY Duty cycle 100% A at 105 A (40°C). Marking mode, ideal for tracing and identifying parts. Cuts all material types (mild, stainless, tempered, HLE), aluminium, copper, etc. Optimized cooling design to operate in an industrial environment. Connectable via an optional CNC kit for use on an automated cutting table. Reinforced structure IP 23. SIMPLE TO USE User friendly interface with OLED display (7 languages). 6 modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger, Cutting of perforated sheets, Marking. Meter for checking the wear of the consumables (tip and electrode). Pneumatic diagnosis (moisture presence test and compressor control). HF-free ignition to prevent disturbances that could damage nearby electronic equipment. Simplified software update via USB cable without any tools or disassembly. HIGH-PERFORMANCE TORCH Premium torch available in 2 lengths and 2 shapes (manual and straight for automation) Large choice of consumables adapted to all thicknesses. Designed to be shock and heat resistant. Quick connection/disconnection of the torch, no tools required for transport or maintenance. Easy to use trigger mechanism for added comfort.

The NEOCUT 125 is a plasma cutter with a duty cycle of 100% at 125 A for cutting work up to 57 mm thick in industrial environment It is equipped with an automatic air pressure management, in all modes, offering an optimum cutting quality throughout the lifespan of the consumables. Also connectable to a cutting table, its «Marking» mode is perfect for tracing and identifying parts SYNERGIC AIR PRESSURE Automatic management of pressure and air flow independent of the torch length and the operating mode (cutting, gouging and marking) Optimised consumable lifespan MAXIMUM PRODUCTIVITY Duty cycle 100% at 125 A (40°C). Marking mode, ideal for tracing and identifying parts. Cuts most materials (mild, stainless, tempered, HLE), aluminium, copper, etc. Optimized cooling design to operate in an industrial environment. Connectable through one of the 3 optional CNC kits for use on automated cutting table. Reinforced case IP 23. SIMPLE TO USE Ergonomic interface with OLED screen (7 languages). 6 working modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger, Cutting of perforated sheets, Marking. Counter to follow the wear of the consumables (nozzle and electrode). Pneumatic diagnosis (moisture presence test and air pressure control). HF-free arc ignition to prevent disturbances that could damage nearby electronic equipment. Simplified software update via USB cable without any tools or disassembly. HIGH-PERFORMANCE TORCH Premium torches available in 2 lengths (6 m / 12 m), 2 types (manual / automatic) and 2 powers for automated cutting (125 A / 160 A). Large choice of consumables adapted to all metal thicknesses. Designed to be shock and heat resistant. Quick connection/disconnection of the torch, without tools required for transport or maintenance. Easy to use trigger mechanism for more comfort.

Designed to work exclusively with NEOPULSE power sources, the separate NEOFEED 4W wire feeder allows for very precise configuration and control of the welding cycle. Its intuitive digital interface makes it easy to act on the welding parameters. Its ultra-precise drive system offers industrialists maximum productivity on all types of materials.

The NEOMIG-i 400 G is a three-phase, multi-process power source with separate wire feeder. Its advanced digital technology and 100% duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies make set-up considerably easier, and reduce spatter during welding. When equipped with the WF wire feeder, the machine offers precise control of the welding parameters in order to deliver the best possible results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (polarity reversal) : Ø 0.9 to 2.4mm MMA DC / Pulse: basic, rutile and cellulosic electrodes. TIG DC Lift / Pulse. Air-arc gouging. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. PREMIUM WELDING High duty cycle of 100% at 400A. Digital arc control with instantaneous ignition. Very stable arc which helps to reduce welding spatter. Compatible with WF 35 and WF 50 wire feeders. MAXIMUM CONNECTIVITY Traceability of all weld beads according to EN 3834. Calibration mode for welding accessories in order to amend the voltage displayed. Connectable via an optional kit (062993) for use with robotic systems. User mode to share the product between multiple operators. Free online tool to customise the interface. Compatible with KOOLWELD 2 cooling unit (075115). Optional Push-Pull torch connection (078741) for WF 50 wire feeder

The NEOMIG-i 500 G is a three-phase, multi-process power source with separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies make set-up considerably easier, and reduce spatter during welding. When equipped with the WF wire feeder, the machine offers precise control of the welding parameters in order to deliver the best possible results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (polarity reversal) : Ø 0.9 to 2.4mm MMA DC / Pulse: basic, rutile and cellulosic electrodes. TIG DC Lift / Pulse. Air-arc gouging. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. PREMIUM WELDING High duty cycle of 60% at 500A. Digital arc control with instantaneous ignition. Very stable arc which helps to reduce welding spatter. Compatible with WF 35 and WF 50 wire feeders. MAXIMUM CONNECTIVITY Traceability of all weld beads according to EN 3834. Calibration mode for welding accessories in order to amend the voltage displayed. Connectable via an optional kit (062993) for use with robotic systems. User mode to share the product between multiple operators. Free online tool to customise the interface. Compatible with KOOLWELD 2 cooling unit (075115). Optional Push-Pull torch connection (078741) for WF 50 wire feeder

The NEOPULSE 220 C is a single-phase pulsed MIG/MAG generator with digital technology. Designed for the highest performance level using the latest technology, it features numerous synergic curves and exceptional arc quality/ performance. Intuitive and highly functional, the digital interface allows for quick and easy modifications of the welding parameters. Fitted with an accurate and powerful 4 drive roll feeding system, the NEOPULSE 220 C offers manufacturers maximum productivity. MULTI-PROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.0 mm - aluminium wire: Ø 0.8 to 1.2 mm - CuSi and CuAl wire: Ø 0.8 to 1.0 mm MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 5 mm). TIG DC Lift / Pulse. SMART SYNERGIC mode: After selecting 2 criteria (material/gas combination and the wire diameter), NEOPULSE automatically works out the optimal welding conditions while still allowing you to adjust the settings (wire feed rate, voltage, current, arc length). ACCURATE Calibration of the wire feed speed to adjust the displayed voltage measurement and refine the energy calculation. Energie, display and energy calculation after welding based on standards EN1011-1, ISO / TR 18491 and QW-409. Portability : load/backup user JOBS and machine configuration from a USB key. Traceability : trace / record all welding steps, cord by cord, during industrial manufacturing in line with standard EN ISO 3834. OPTIMISED MIG/MAG SETTINGS Welding processes: Manual, Dynamic STD, Pulsed, Arc Module (variation of hot / cold current) TACK modes: SPOT and DELAY. Trigger options supported: 2T and 4T. Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill, Postgas, etc.

The NEOPULSE 320 C is a digital 3 phase MIG/MAG pulse welding machine. Designed for the highest performance level using the latest technology, it features numerous synergic curves and exceptional arc quality/performance. User friendly and highly practical, the digital interface is designed for quick and easy adjustments of the welding parameters. Equipped with a precise 4-Roll drive system, this powersource provides unparalleled productivity and welding quality on all types of materials. MULTI-PROCESS WELDING MIG/MAG : - steel wire: Ø 0.6 to 1.2 mm - stainless steel wire: Ø 0.8 to 1.2 mm - aluminium wire: Ø 0.8 to 1.2 mm - CuSi and CuAl wire: Ø 0.8 to 1.2 mm MMA DC / Pulse: basic, rutile and cellulosic electrodes (up to Ø 5 mm). TIG DC Lift / PULSE SMART SYNERGIC mode: After selecting material/gas combination and the wire diameter. NEOPULSE automatically works out the optimal welding conditions while still allowing you to adjust the settings (wire feed rate, voltage, current, arc length). ACCURATE Calibration of the welding cables and motor speed, in order to adjust the voltage displayed and refine the energy calculation. Energy, display and energy calculation after welding based on standards EN1011-1, ISO / TR 18491 and QW-409. Portability: load/save user JOBS and machine settings using a USB stick. Traceability: track / record all welding steps, weld by weld, during industrial manufacturing in line with standard EN ISO 3834. OPTIMISED MIG/MAG SETTINGS Welding processes: Manual, Dynamic STD, Pulsed, Arc Module (variation of hot / cold current) TACK modes: SPOT and DELAY. Trigger options supported: 2T and 4T. Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill, Postgas, etc.

Digital technology, the NEOPULSE 500 G is a pulsed MIG/MAG welding power source with a separate wire feeder. Ultra high performance and designed for the highest performance level using the latest technology, it features +100 synergic curves and exceptional arc quality/performances. Intuitive and highly functional, its digital interface allows you to change welding parameters with ease. Equipped with its NEOFEED-4W reel (optional), this welding power source provides productivity and quality of unmatched welding on all types of alloys. MULTI-PROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.2 mm MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 6 mm) TIG DC lift / Pulse. SMART SYNERGIC mode : Select the material/gas type and wire diameter, now the NEOPULSE automatically determines the optimal welding conditions and allows you to adjust the settings (wire feed speed, voltage, current, arc length). ACCURATE Calibration of welding accessories, to adjust the displayed voltage measurement and the energy calculation. Energy, display and energy calculation after welding according to EN1011-1, ISO / TR 18491 and QW-409. Portability : load / save as, JOBS from a USB key as well as the machine configuration. Traceability : trace / record all welding steps, weld by weld, during industrial manufacturing according to EN ISO 3834. OPTIMISED MIG/MAG SETTINGS Welding processes : Manual, Dynamic STD, Pulsed, Modul Arc (variation of hot / cold current) TACK modes : SPOT and DELAY. Trigger management : 2T and 4T. Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Filler, Postgas, etc.

Ner-inox is a controlled chemical oxidation of the stainless steel surface. As a result we obtain an intensive black colour surface and appreciable uniformity. With Ner-inox we offer a differential option to show the typical stainless steel.

The new Southco E5-6 adjustable are the latest expansion of the successful E5 Series of cam closures. This new adjustable thickness version allows them to adapt to a multitude of applications just by modifying the depth of their ratchet. With up to 11.5 mm of grip range, these closures offer a secure and secure fixation in any thickness. Thus, the new E5 offer a great flexibility compensating tolerances of the sheet for greater sealing and security. In combination with their joint they provide an IP65 / NEMA 4 against water and dust, which makes them perfect for both indoor and outdoor applications. For its part, its different ratchet options facilitate the closing action and provide up to 1mm of additional compression. In addition, the plastic lid reduces the noise caused by vibration in applications exposed to rattle and prevents scratches on the sheet. With the same installation dimensions as the entire Southco E5 Series, the new closures can be purchased as a complete set or disassembled for greater versatility. In this way, the use of adjustable E5 closures is indicated in applications of different sectors: rail, aeronautics, land transport, metal cabinets and racks, industrial machinery, Self-Service and Vending ... If you want more information, come and meet us at MetalMadrid 2018 or, if you prefer, call us at 902 36 15 02

AMADA's new EML 2515 AJ combined punching/fiber laser machine, streamlining production and reducing costs. How? Allowing to implement different part designs and producing them efficiently and profitably. 6 phases in the same process: - Punching - Laser - Drawings - Threaded - Countersunk - Bent

Manoeuvrability and movement of heavy energy equipment

After the successful launch of the electronic actuator AC-EM-05, Southco extends the family with the new AC-EM-10. Now the R4-10 Series of rotating closures can also be converted into electronic systems in the most competitive way. Designed to provide added value to rotary closures with low cost and quality as always, the AC-EM-10 actuators allow to create competitive electromechanical systems with the R4-10 closures. Its simple operation is based on an electronically activated button that activates the trigger of the R4 and unlocks the closure. With a minimum power consumption, these actuators can be integrated into the R4-10 with its optional mounting set easily and quickly. In addition, its compact and lightweight design allows it to adapt to applications where optimizing space is essential and its IP55 sealing against water and dust makes the AC-EM-10 a versatile option for more hostile environments. The configuration options with and without connector allow to customize and integrate the AC-EM in the most efficient way and adjusted to the needs of each application. On the other hand, its own ease of installation allows its integration into pre-existing rotating systems in a natural and simple way. In this way, the use of electronic actuators AC-EM-10 is especially indicated in applications of different sectors: rail, aeronautics, land transport, medical equipment, industrial machinery, Self-Service and Vending ... If you want more information, come and meet us at MetalMadrid 2018 or, if you prefer, call us at 902 36 15 02

MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift multiprocess inverter welding machine with external wire feeder with 4 rolls. Flexible use with different materials (steel, stainless steel, high strength steel, aluminium, etc.) and wide variety of application fields (industry, metal structures, construction, etc.). The XD model is characterised by a high duty cycle for continuous machining and particularly heavy applications. Particularly resistant to dirt and dust thanks to the particular construction of the ventilation system which, following a dedicated tunnel, allows preservation of the electronic components, guaranteeing longer duration over time. Made in Telwin ATC technology allows you to easily achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc. The 4-roll feeder with 4m cable bundle (direct connection) is robust and transportable, making remote control of the generator possible. Electrode welding is both direct current and pulse current. Pulse mode (MMA Pulse) is recommended with basic electrodes in position welding and ensures less spray and reworking and higher welding seam quality. Gouging function is available using carbon electrodes. Low weight and compactness also ensure easy transportability in all intervention locations, both indoors and outdoors. Features: robust, resistant to impact and dust; reduced weight and size; high energy savings; backlit LCD display. MIG-MAG operating mode; manual and synergic; 35 pre-set synergic curves; wire speed and welding voltage and current shown on an LCD screen; operation selection 2/4 times, spot; adjustments: wire up slope, electronic reactance, wire burnback time, post gas; ATC wire feed unit adjustments: manual wire feed, weld seam adjustment, wire feed speed (MAN mode) and welding power (SYN mode); possibility of connecting a semi-automatic type wire feeder unit (CV). MMA direct and pulse current (MMA PULSE) operation; VRD device; TIG GOUGING

New optimized design of the proven LDA cordless torque wrench.