The Southco EM-05 series of electronic sliding latches has a new member: the EM-05-04 sensor latch. Its door detection system, morphology and reliability are its best introduction. The new Southco EM-05-04 electronic closure combines a compact and lightweight design with an effective gear motor mechanism and a closure status monitoring system . Its integrated sensor allows to receive “open / closed” door signal at all times with minimal power consumption. In addition, EM-05 closures easily integrate with any pre-existing control system. To the comfort of its closure by impact is added its hidden installation, which improves the security and design of the application. For its part, its small dimensions facilitate its installation in applications where space is a fundamental factor. Their versatility makes them an ideal solution for applications in different sectors: medical equipment, rail, aeronautics, land transport, Self-Service and Vending ... Don't you know which electronic lock best fits your application? Check our website. If you want more information, come and meet us at MetalMadrid 2019 or, if you prefer, call us at 902 36 15 02

Southco continues to expand its extensive range of R4 rotary closures; the new R4-20 with manual operation are the latest addition. Thanks to its lever to press directly with the hand, do not require any type of additional accessory to operate them. Designed to be opened in a simple way by actuating its lever, its compact body and ease of assembly, it is a robust closure ideal for applications with small spaces. Available with one or two stage rotors, which guarantee safety even in the event of a false closing. In addition, it offers high coupling tolerances, perfect for flexible panel applications with inherent misalignment problems. The R4-20 are an ideal solution for different sectors: rail, aeronautics, special vehicles, industrial machinery ...

Southco introduces its new series of rotating closures in miniature size, the versatile R4-05: a perfect combination of safety and resistance guaranteed without sacrificing space or functionality. The latest addition to the successful R4 one- and two-stage rotary seals family is 60% smaller than Southco's smaller previous rotary seal. Despite its dimensions, which reach down to 46 mm high, provides a hidden mechanism capable of offering greater security and resistance than any other miniature closure; to this is added the comfort implied by its impact closure system: just push to close. Another of the added values ​​of this product is the possibility of remote operation in combination with Southco cables and actuators. Its compact design minimizes the projections inside the enclosure, which, together with its size, makes the R4-05 an ideal option in applications with significant space limitations; In addition, its symmetrical design opens an infinite range of possibilities for assembly and adaptation. Also, its integrated damper eliminates noise and annoying vibrations that may occur in the application, for example, in any means of transport that generates rattling. Thanks to the sum of these variety of advantages, the R4-05 are especially recommended for various sectors: railway, aeronautics, land transport, medical equipment, Self-Service and Vending ... If you want more information, come and meet us at MetalMadrid 2018 or, if you prefer, call us at 902 36 15 02

The reference R4-81 is Southco's new access solution for applications that require large workloads and total space optimization. The range of rotary systems is one of the most complete and successful of the Southco catalog and continues to expand and improve day by day. The latest addition is the R4-81 series, an intelligent solution in which efficiency and space optimization go hand in hand, since it combines rotary shutter and actuator in a single product. Its compact design makes the R4-81 a versatile solution and adaptable to small spaces. In addition, its hermetic seal provides protection against dust and liquids to achieve a product suitable for aggressive environments. Thus, its robust construction offers high resistance and long life cycles even in the most hostile applications. Compatible with a wide variety of rotary locks R4, can be used as a multi-point actuator or with a single point of closure. On the other hand, the multiple key combinations further expand your personalization possibilities. Like the rest of the range of rotary closures, the R4-81 are especially recommended for various sectors. Thus, they are ideal for rail, aeronautics, heavy vehicles, medical and emergency equipment, machinery ... If you want more information, come and meet us at MetalMadrid 2018 or, if you prefer, call us at 902 36 15 02

The new R4-82 integrate latch and actuator in a compact and versatile product for total ergonomics. Starting from the concept of combining an R4 rotary latch and a comfortable actuator in one piece, the R4-82 is a complete and high-performance solution. Especially suitable for applications where space optimization is a critical point, its small size and robustness allow it to adapt to many installations. The integrated shock absorber facilitates a quieter close while its allows you to close the door with a push. In addition, the possibility of a double rotor guarantees greater safety. They are ideal for generator sets, rail, aeronautics, special and heavy vehicles, medical and emergency equipment, machinery ... If you want more information, contact us or, if you prefer, call us at +34 902 36 15 02

Bridge ladder with 100x60 platform, 15 cm steps and 60º ascent sections: -Non-slip 15 cm steps. deep. -60º incline for a comfortable and safe climb. -Non-slip platform of 100x60 cm. -Handrail and removable railing of 110 cm. Tall. -Max 15 cm. height that prevent objects from falling from the work plane. -Two stabilizing bases with non-slip plugs for greater safety. -Width ladder of 60 cm. -Available in different heights. -Variable weight depending on height. -The measurements of this product can be customized according to conditions. -NFC Product Periodic Review System, included. More information: info@faraone.es

General catalog of laser products

UHMPE slings are 10 times stronger than steel. It floats in water due to its low density (0.97). Excellent abrasion and cut resistance. UV resistant. Chemical resistance to acids, alkalis and solvents. Low water absorption. High durability in the elements.

Alumold®-500 Certal® Certal® SPC Hokotol® Weldural®

PARTS UPON DRAWING Gardette groupe manufacture your prismatic parts according to your needs and specific demands with all kind of heat treatment or surface treatment.

We design for you special parts and products from your drawings –we offer a wide variety of materials and manufacturing methods. We invite you to benefit from our experience in fastening solutions to reach the highest levels of quality and efficiency in your processes and products. We can manufacture fastening elements from a wide range of shapes and finishes: Countless sizes: lengths and diameters, flange dimensions, grip ranges, etc. Infinite types of head for rivets and insert nuts: dome, countersunk, large and super large heads, among others. Great variety of materials: steel, stainless steel, aluminium, copper, non-ferrous metals, special materials. Surface treatments and coatings: polished, lacquered, galvanic zincation and nickel alloys, chrome, burnished, phosphate, anodized and passivated, treatments with zinc particles, organic treatments, sealing treatments. Different finishes: lacquered, frosted, milled (CNC/HSC), rectified and turned, cutting or rolling coils, drum polishing, sandblast, erosion, assembly, etc. Apart from fastening solutions, we also manufacture special cold forming parts for a wide variety of industries such as renewable energies, electrical appliances manufacturing, construction, furniture or automotive. Nails, threaded inserts, washers…. our technical department will analyse the feasibility of any product that it is not in our product range.