My Factory allows you to configure all the cross-functional elements related to factory management that carry out production processes. It details the list of part numbers and their composition, raw materials, tooling, manufacturing routes, assets, available shifts, and more.

V-factory's IoT concept favours a direct response service through visualising entire connected production. A state of the art monitoring and control system that allows you to visualize the entire connected manufacturing environtment. Anytime, Anywhere. With just a smart device and internet connection. The availability of machine diagnostic data enables early identification of problems and reduced machine downtime.

Stand-Alone Master Unit to control smaller machinery connecting with up to 4 safety devices, i.e. 1 safety light curtain, 1 e-stop, 1 magnetic sensor and 1 two-hand switch

Nagamohr is an industrial company dedicated to high precision turning, specialized in complex shafts mainly for the automotive industry. Born out of the transfer of a small production centre from Germany to Spain in 1993, it has developed since into a company with nearly 100 employees, an annual production of more than 20 million shafts and turnover of approximately 10 million euro. The high and constant quality of its products, the state-of-the-art technology of its production means, its competitive prices which enable it to export even to Eastern Europe and China, its flexibility towards changes in production planning, as well as its highly skilled professionals are the basis for the sustained historical and future growth of the company. Nagamohr is specialized in the production of large series, highlighting among others: • Solid and hollow transmission shafts • Armature shafts for electrical motors • Shafts for powertrain and distribution boxes • Throttle shafts and valves for gas recirculation systems These shafts are used in windshield wiper systems, electric window lifts, motorized seat adjustments and sunroofs, powertrain systems, exhaust air management systems and other similar applications.

Plates that sell. The best way to promote your sales is your own product. Our nameplates are designed to help develop your brand image or corporate image by providing information of your company’s name, logo, slogan, address, web site, qr code etc. We offer a wide variety of finishes suiting the most demanding design requirements and conditions of exposure. Our nameplates remain unalterable over the years. In addition to any customer-specific designs, we have a considerable stock of dies and can therefore offer you, nameplates in many different standard shapes and sizes.

Hinges made of 316 stainless steel, which is especially resistant to corrosion

Manufacturing of robust and high-precision mechanical components for marine and naval industry applications.

Las naves de estanterías (autoportantes) de OHRA unen perfectamente la funcionalidad de edificación necesaria con la tarea de una instalación de estanterías convencionales. Las columnas y bastidores sirven como elemento de soporte para el techo y la pared. Por eso no es necesario construir edificaciones - naves. La posibilidad de realizaciones individualizadas, permiten la adaptación a sus necesidades de almacenaje. La planificación, construcción, fabricación, entrega y el montaje hasta la solicitud de la construcción de una sola vez.

The NEOCUT 105 is a plasma cutter with a duty cycle of 100% at 105 A for cutting work up to 50 mm thick in industrial environments. It is equipped with automatic air pressure management, in all modes, offering optimum cutting quality throughout the lifespan of the consumables. Can also be connected to a cutting table, its «Marking» mode is perfect for tracing and identifying parts. SYNERGISTIC AIR PRESSURE Automatic management of pressure and air flow rate whatever the torch length and the operating mode (cutting, gouging and marking) Optimised consumable lifespan MAXIMUM PRODUCTIVITY Duty cycle 100% A at 105 A (40°C). Marking mode, ideal for tracing and identifying parts. Cuts all material types (mild, stainless, tempered, HLE), aluminium, copper, etc. Optimized cooling design to operate in an industrial environment. Connectable via an optional CNC kit for use on an automated cutting table. Reinforced structure IP 23. SIMPLE TO USE User friendly interface with OLED display (7 languages). 6 modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger, Cutting of perforated sheets, Marking. Meter for checking the wear of the consumables (tip and electrode). Pneumatic diagnosis (moisture presence test and compressor control). HF-free ignition to prevent disturbances that could damage nearby electronic equipment. Simplified software update via USB cable without any tools or disassembly. HIGH-PERFORMANCE TORCH Premium torch available in 2 lengths and 2 shapes (manual and straight for automation) Large choice of consumables adapted to all thicknesses. Designed to be shock and heat resistant. Quick connection/disconnection of the torch, no tools required for transport or maintenance. Easy to use trigger mechanism for added comfort.

The NEOCUT 125 is a plasma cutter with a duty cycle of 100% at 125 A for cutting work up to 57 mm thick in industrial environment It is equipped with an automatic air pressure management, in all modes, offering an optimum cutting quality throughout the lifespan of the consumables. Also connectable to a cutting table, its «Marking» mode is perfect for tracing and identifying parts SYNERGIC AIR PRESSURE Automatic management of pressure and air flow independent of the torch length and the operating mode (cutting, gouging and marking) Optimised consumable lifespan MAXIMUM PRODUCTIVITY Duty cycle 100% at 125 A (40°C). Marking mode, ideal for tracing and identifying parts. Cuts most materials (mild, stainless, tempered, HLE), aluminium, copper, etc. Optimized cooling design to operate in an industrial environment. Connectable through one of the 3 optional CNC kits for use on automated cutting table. Reinforced case IP 23. SIMPLE TO USE Ergonomic interface with OLED screen (7 languages). 6 working modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger, Cutting of perforated sheets, Marking. Counter to follow the wear of the consumables (nozzle and electrode). Pneumatic diagnosis (moisture presence test and air pressure control). HF-free arc ignition to prevent disturbances that could damage nearby electronic equipment. Simplified software update via USB cable without any tools or disassembly. HIGH-PERFORMANCE TORCH Premium torches available in 2 lengths (6 m / 12 m), 2 types (manual / automatic) and 2 powers for automated cutting (125 A / 160 A). Large choice of consumables adapted to all metal thicknesses. Designed to be shock and heat resistant. Quick connection/disconnection of the torch, without tools required for transport or maintenance. Easy to use trigger mechanism for more comfort.

Designed to work exclusively with NEOPULSE power sources, the separate NEOFEED 4W wire feeder allows for very precise configuration and control of the welding cycle. Its intuitive digital interface makes it easy to act on the welding parameters. Its ultra-precise drive system offers industrialists maximum productivity on all types of materials.

The NEOMIG-i 400 G is a three-phase, multi-process power source with separate wire feeder. Its advanced digital technology and 100% duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies make set-up considerably easier, and reduce spatter during welding. When equipped with the WF wire feeder, the machine offers precise control of the welding parameters in order to deliver the best possible results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (polarity reversal) : Ø 0.9 to 2.4mm MMA DC / Pulse: basic, rutile and cellulosic electrodes. TIG DC Lift / Pulse. Air-arc gouging. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. PREMIUM WELDING High duty cycle of 100% at 400A. Digital arc control with instantaneous ignition. Very stable arc which helps to reduce welding spatter. Compatible with WF 35 and WF 50 wire feeders. MAXIMUM CONNECTIVITY Traceability of all weld beads according to EN 3834. Calibration mode for welding accessories in order to amend the voltage displayed. Connectable via an optional kit (062993) for use with robotic systems. User mode to share the product between multiple operators. Free online tool to customise the interface. Compatible with KOOLWELD 2 cooling unit (075115). Optional Push-Pull torch connection (078741) for WF 50 wire feeder

The NEOMIG-i 500 G is a three-phase, multi-process power source with separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies make set-up considerably easier, and reduce spatter during welding. When equipped with the WF wire feeder, the machine offers precise control of the welding parameters in order to deliver the best possible results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (polarity reversal) : Ø 0.9 to 2.4mm MMA DC / Pulse: basic, rutile and cellulosic electrodes. TIG DC Lift / Pulse. Air-arc gouging. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. PREMIUM WELDING High duty cycle of 60% at 500A. Digital arc control with instantaneous ignition. Very stable arc which helps to reduce welding spatter. Compatible with WF 35 and WF 50 wire feeders. MAXIMUM CONNECTIVITY Traceability of all weld beads according to EN 3834. Calibration mode for welding accessories in order to amend the voltage displayed. Connectable via an optional kit (062993) for use with robotic systems. User mode to share the product between multiple operators. Free online tool to customise the interface. Compatible with KOOLWELD 2 cooling unit (075115). Optional Push-Pull torch connection (078741) for WF 50 wire feeder

The NEOPULSE 220 C is a single-phase pulsed MIG/MAG generator with digital technology. Designed for the highest performance level using the latest technology, it features numerous synergic curves and exceptional arc quality/ performance. Intuitive and highly functional, the digital interface allows for quick and easy modifications of the welding parameters. Fitted with an accurate and powerful 4 drive roll feeding system, the NEOPULSE 220 C offers manufacturers maximum productivity. MULTI-PROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.0 mm - aluminium wire: Ø 0.8 to 1.2 mm - CuSi and CuAl wire: Ø 0.8 to 1.0 mm MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 5 mm). TIG DC Lift / Pulse. SMART SYNERGIC mode: After selecting 2 criteria (material/gas combination and the wire diameter), NEOPULSE automatically works out the optimal welding conditions while still allowing you to adjust the settings (wire feed rate, voltage, current, arc length). ACCURATE Calibration of the wire feed speed to adjust the displayed voltage measurement and refine the energy calculation. Energie, display and energy calculation after welding based on standards EN1011-1, ISO / TR 18491 and QW-409. Portability : load/backup user JOBS and machine configuration from a USB key. Traceability : trace / record all welding steps, cord by cord, during industrial manufacturing in line with standard EN ISO 3834. OPTIMISED MIG/MAG SETTINGS Welding processes: Manual, Dynamic STD, Pulsed, Arc Module (variation of hot / cold current) TACK modes: SPOT and DELAY. Trigger options supported: 2T and 4T. Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill, Postgas, etc.