The new electronic sliding latch EM-05-04 with sensor has its door detection system, morphology and reliability as a cover letter. The Southco EM-05-04 combines a compact and lightweight design with an effective gear motor mechanism and a system for monitoring the state of the closure. Its integrated sensor allows to receive the "open / closed" door signal with minimal power consumption. In addition, EM-05 closures easily integrate with any pre-existing control system. To the comfort of its closure by impact is added its hidden installation, which improves the security and design of the application. For its part, its small dimensions facilitate its installation in applications where space is a fundamental factor. Their versatility makes them an ideal solution for applications in different sectors: medical equipment, rail, aeronautics, land transport, Self-Service and Vending ... If you want more information, contact us or, if you prefer, call us at 902 36 15 02

Saves excess tape during load lashing. Optimizes space in ratchet storage.

With the 516 telescopic ratchet, Stahlwille is expanding its ½" ratchet range. This new tool "Made in Germany" was developed primarily for use in the commercial vehicle sector as well as for bolt-tightening operations on industrial installations. In these environments, fasteners often have to be tightened with higher forces. The new ratchet complies with DIN 3122/ISO 3315 and is dimensioned for torques up to 512 Nm. It is therefore recommended for professional users who frequently work with high torques. Thanks to the telescopic shaft, it is particularly versatile – even in difficult spaces with limited room to move. The shaft of the ratchet can be adjusted in five steps from 410 mm to 630 mm, where each step is 55 mm. The variable length opens up additional application possibilities where the use of a ratchet is not normally possible or only possible to a limited extent. The extension action is fast and safe thanks to the slide bearings and endstop protection. The length is conveniently adjusted by means of a rocker at the front end of the shaft. The ratchet drive is tested in compliance with DIN, has 36 teeth and transmits high tightening forces of up to 512 Nm absolutely reliably to screws and nuts. The change-over switch for right and left rotation is located on the top of the head in a slight recess. Accidental change-over, for example when coming into contact with components, is thus prevented. The ½" square drive can be fitted with all the usual sockets and bits. The two-component convex handle of the 516 telescopic ratchet fits snugly in the hand – an important prerequisite for longer, fatigue-free work. The materials used provide a secure grip even when hands are dirty or wet. In addition, the grip components are resistant to oils, greases, brake fluids and Skydrol, a hydraulic fluid used in the aviation sector.

The Nexa 400 Pro is a high-precision, large-volume 3D printer manufactured by Nexa3D, a California-based company. This printer utilizes Stereolithography (SLA) 3D printing technology to produce high-quality and precise parts. The Nexa 400 Pro has a build volume of 16 liters (274 x 155 x 400 mm), making it one of the largest 3D printers in the market. This large build capacity allows users to produce large and complex parts with high precision and speed. The Nexa 400 Pro uses a high-intensity LED diode array and a specially designed membrane to ensure a fast photopolymerization process, achieving resolutions as fine as 0.05mm.

The Nitrogen gas springs patented by Bordignon meet the requirements of all sizes. They comply with ISO 11901 standard, as well as many other models with higher performance or up to three times greater resistance, all while having much more compact sizes. The reduction in mold size translates to lower production costs and, consequently, improved productivity, benefiting both mold makers and manufacturers.

NITROGEN – A line of robust, reliable and modular Nitrogen generators, based on Pressure Swing Adsorption (PSA) technology using state of the art Carbon Molecular Sieves adsorbents. Nitrogen is designed to be easily installed in any indoor facility, requiring only a compressed air line and a power connection. The modular philosophy of SYSADVANCE Nitrogen generators allows the installation of multiple parallel units. SYSADVANCE generators produce high purity Nitrogen from compressed air, allowing continuous availability at a very competitive cost, compared to alternative supply with cylinders or cryogenic tank. With purities up to 99.999% of N2, Nitrogen can be connected to an external buffer allowing a backup or a delay of production/consumption according to the needs of each application.

Excellent – when good gets even better. The No 17 Open-Ratch combined open-jaw & ring ratchet spanner is now also available in 21, 22 and 24 mm. The integrated ratchet with a double hexagon for clockwise or anticlockwise use has a working angle of 5°. The chrome-plated surface with the rounded STAHLWILLE finish provides sufficient grip even with dirty hands. And the best thing is the tool is now also available as No 17F in sizes from 9-24 mm as a flat version. Both ring ratchet spanners (17 and 17F) are available in a convenient set in a robust roll-up wallet - or in individual sizes. Strong and extremely tough. There are many spanners available. But hardly any that are as well thought out as STAHLWILLE spanners. The non-slip finish means all our spanners fit comfortably in the hand, even when used for long periods of time and when higher forces are applied. Lighter. The thumb groove along the spanner handle eliminates material where there is no stress and concentrates it where it is needed. Similar to the principle of an H-beam in construction, extreme load-bearing capacity and maximum flexural strength are achieved with lower weight. More precise. Our very tight manufacturing tolerances and reproducible dimensional accuracy ensure that one STAHLWILLE spanner is as close-fitting as the next. In this way, both open-jaw and ring spanners will always firmly hug the fastener head – for excellent power-lock. More robust. When force is applied to a spanner, the greatest force acts on the area between the jaw and the shank, which is why STAHLWILLE spanners are reinforced at this point. The special design makes the load zones more resilient, which reduces the risk of breakage to a minimum.

Penetrating Liquids and Magnetic Particles for all types of industries where a high level of quality is required. ISO, AMS, ASME, and approvals from manufacturers of various industries: aeronautics, nuclear,...

EGA Master Titanium Tools have been developed with the help of the most advanced technology. They are manufactured with Titanium alloy, 6Al-4V, which has been used in the most innovative and advanced fields, such as aviation, military and aerospace applications. Its properties make this alloy the best one among the current existing ones for special and critical applications that require high mechanical properties, combined together with features that no other steel alloy tool can reach, like Non-Magnetism.

Non-stick coatings by electrostatic deposition of PTFE (TEFLON®), ECTFE (HALAR®), etc. for the food and packing industry which confer excellent release properties to the parts on which they are applied. • Suitable to new and used molds. • Thermal resistance from -190°C up to +260°C. • Remain always clean. We have special qualities: • For food contact. • Resistant to abrasion and wear. • Corrosion free.