Austenitic stainless steels contain a significant amount of chromium, and sufficient nickel or manganese to “stabilise” the austenite micro-structure that gives these steels good formability and ductility (and makes them non-magnetic). A typical composition is 18% chromium and about 8% nickel, as found in the popular 304 grade. Some 300 series stainless steels, such as the 316 grade, also contain molybdenum. This increases the material’s resistance to acids, pitting and crevice corrosion. All austenitic grades can be highly durable and corrosion resistant and have high ductility, low yield stress, relatively high tensile strength and good weldability. As such, they have a very wide range of uses.

The electrolyte flows all by itself. Similar to the wire feed control in MSG welding machines, a microprocessor calculates the optimum amount of electrolyte, which is then fed directly into the carbon fibre brush by a servo pump. As soon as the brush is lifted off the workpiece, the electrolyte supply stops; with a back pump that prevents dripping – all fully automatic! Features automatic! 3 Significantly faster working 3 Reduced fluid consumption 3 Compatible with any cleaning device on the market The complete AutoFeed inside the compact MagicBox. All of our technology for the Auto Feed system is completely protected in the compact MagicBox. This is simply connected to any weld cleaning device – which then also takes over the power supply (a widerange power supply unit makes it possible). A voltage sensor measures the cleaning energy – and the servo pump doses exactly the right amount of electrolyte, which is then delivered via the hose system and AutoFeed handle directly into the carbon fibre brush. Even a 5l canister with the electrolyte liquid can be stored in the MagicBox (signal transmitter for empty supply included). Of course, all components are acid-proof; due to the use of mild REUTER electrolytes, hoses and AutoFeed handle do not have to be cleaned after use.

Safety hook for radio-controlled lifting. For indoor and outdoor lifting applications, for all types of cranes. Simplify your processes with the push of a button.

At CONIEX we have more than 30 years of experience in blasting surface treatment applications and we like to pass on our knowledge so that your processes are efficient and profitable. Whether you need to carry out an automated blasting process or a manual sandblasting application, let our specialists advise you, who will propose the best solution.

Gimatic Iberia offers robot peripherals approved and accepted by most manufacturers in the automotive sector. The high quality of the materials used, together with the rigorous evaluation processes applied in the production of all components, ensure maximum customer satisfaction by providing optimal performance over a longer period. • Automatic tool changers for robot tools used in handling or welding, with load capacities up to 1,500 kg. • Rotary solutions – Swivel, which can be combined and integrated with the automatic tool changer. CiRo, which can be used without the typical wiring restrictions of other products. • Wide range of connection packages, tool parkings, hose packages, and more.

Automation of machine tools, assembly lines, Emobility

The GROB rotary pallet storage system expands the G-module into a flexible production cell and offers the ideal entry into automated and highly efficient production. Features: Variants with up to 15 pallet storage spaces on one to three levels. Easily accessible set-up station located next to the machine control panel Quick pallet changeover when using two pallets thanks to an innovative storage and retrieval device Visualisation and organisation of production orders by means of flexible control software State-of-the-art control software with 19-inch touch screen panel The advantages of the rotary pallet storage system are: Complete solution from a single source with a uniform design Economical production through increased machine utilisation Possibility of unmanned or understaffed production shifts Best view of the working area and pallet storage locations Parallel loading and unloading of pallets during the current machining process High storage density with small footprint Pallet storage solution with low initial investment Easy retrofitting to existing machines

The MicroStep Group not only manufactures cutting solutions, but also produces automated systems adapted to the customer's needs, with the aim of reducing operating times, immediately increasing productivity and increasing storage space in a smaller area.

From small batches to large series. Modules for Hard Automation and robotic systems, collaborative systems, intelligent sensors, and software solutions for data management, offline programming, and simulation offer metal processing companies a wide range of welding possibilities, starting with single-batch production. Automated systems are therefore profitable today not only for large companies but also for SMEs. At Fronius Welding Automation, our customers get the best solution from a single source.

Customized automated measurement solutions to optimize dimensional control in production

Optimización del espacio, reducción de costes de almacenaje y de manipulación de material. Incremento de la productividad y seguridad en sus operarios. Producto realizado 100% en Alemania, se caracteriza por su calidad, eficiencia y versatilidad. Diferentes opciones de almacenaje, desde una torre hasta complejos sistemas logísticos, que crecen a medida que lo hacen las necesidades de su empresa.

Stamped parts in stainless steel.

Set of cones assembled in stainless steel.