We have developed our own low-cost foaming system. This allows us to lighten the weight while minimizing the material used and maintaining all its mechanical resistance. As shown in the photo, it is possible to add an on-line co-extrusion to the profile for a high-quality exterior finish. It is also possible to apply aluminum or other semi-rigid material decorated folio.

Comprehensive manufacturing and engineering services tailored to customer specifications.

Unlike other producers, our company owns the necessary machinery for coating in line, this allows to optimize the production costs up to 50% as well as to use recycled material or 2nd quality since the decorative folio gives us an excellent finish. The applied decorative folio can be plastic, paper or aluminum or other semi-rigid material.

Folleto especial metal - Bessey

Stirrup type rubber flooring with hessian reinforcement, easy to install, very resistant and with very good thermal and acoustic insulation, especially suitable for the protection of floors or walls in public places...

Geinfor predicts your factory's demand in minutes using machine learning natively within your ERP. No imports required.

Forged bars in stock in C45,S355J2,42CRMO4,34CRMO4...

Forging - hot forming -Steel (carbon & stainless), aluminum, brass and bonze

We forge other non-ferrous materials like aluminum or brass, saving raw material and increasing mechanical properties according to the needs of our customers. Aluminum forging Forged aluminum parts have much higher mechanical properties than injected aluminum parts, a higher fatigue strength, with the consequent maintenance of mechanical properties over time, under very demanding conditions. In addition, on the pieces obtained by the Forging process, we can make a series of surface finishes impossible to perform with the parts obtained by Injection, as in the case of ceramic coatings. With respect to weight, a piece forged in aluminum has a weight three times inferior to that of a piece of steel Brass Forging The Brass forging or hot stamping consists of deforming a piece of brass rod previously exposed to temperature under pressure of two matrices that give shape. The metallurgical parameters to be taken into account in the stamping are the composition of the brass and the temperature. Depending on the composition of the brass, it acquires certain properties, and influences the mechanical characteristics, plasticity, fusibility and conformability.

Designed and manufactured to withstand heavy loads and movements with mechanical traction.

Gases for root shielding on high and some low alloyed steels.

- Twisting for wire connection for normal & special wires, and for I-/U-/IX-/UX-Pin - Automatical tool re-equip (via robots or transfer) - Fully synchronized movements allow for a robust process - Compact machine in vertical setup - Synchronized twisting of up to 10 layers - Axial force up to 100 kN - Torque up to 4.500 Nm

The Formlabs Form 3L 3D printer is an outstanding resin printer designed for the creation of high-quality and precise three-dimensional objects. It uses stereolithography (SLA) technology, which is based on the selective polymerization of liquid resin using ultraviolet light to produce parts with an exceptional level of detail and definition. The Form 3L has the ability to print larger objects, with a build volume of up to 335 x 200 x 300 mm, making it suitable for the production of larger parts. The printing resolution is exceptional, reaching only 25 microns, which guarantees the precision and high quality of the manufactured parts. This printer is also distinguished by its versatile range of resins, including standard, technical and specialized resins, allowing it to produce parts with a variety of physical and aesthetic properties, from precise prototypes to final parts with different levels of rigidity, flexibility or transparency. . In addition, its resin management system is efficient and easy to use, facilitating the production process.