-Calendars and Turns Management -Staff’s Planning -Operator’s Reporting and Periodical Analysis -Operator’s signings (If the Cost Module is not hired)

The MOTOMAN HC10 is a 6 axes human-collaborative robot with a payload of 10 kg. Operator’s safety is assured by a Power and Force Limit technology that stops the robot in case of contact with an operator. The MOTOMAN HC10 can operate without additional protective measures like a safety fence, depending on the risk assessment. This saves space and costs. Its installation area is very flexible and therefore able to operate at different workplaces.

Our Weld Purge Monitors® have been specifically designed for excellent weld purge conditions, creating the best rust and discoloration free welds. The World standard PurgEye® 100 IP65 Hand Held Weld Purge Monitor® Push button ‘Auto Calibration’ feature at ambient (20.94%). Leak tight probe assembly. Low battery and low sensor indicator. Longer life sensor, 18 months approx. Quick connect/disconnect leaktight fittings for gas purge tubing. Tripod mount. PurgEye® 200 IP65 Hand Held with PurgeNet™ Battery or mains operated 90/250V single phase 50Hz or 60 Hz AC. Flow detection for accurate reading of gas samples. PurgEye® 300 Nano Low cost, small, lightweight “Entry Level” 1ppm Monitor®. Mains only. Operating voltage 110/230V single phase 50/60Hz. Supplied with an external 12V power supply unit (PSU). Input voltage range 90 to 260 AC. PurgEye® 500 Desk with PurgeNet™ Reads PPM or Percentage. Mains Operated. Supplied with an external 12V power supply unit (PSU). Input voltage range 90 to 260 AC. PurgEye® 600 Touch Screen with PurgeNet™ Reads PPM or Percentage. Large touch screen with on-screen graph of the current weld. PurgEye® 1000 Remote with PurgeNet™ Hand held display and a 10m lead as standard. Optional 100m reel of outdoor cable with locking connectors. Reels of extensions cable can be connected for leads upto 1 km! Easy to pull through pipes. 1” ø stainless sensor holder to place at the weld site inside pipes to send purge data to the monitor up to 1km away. Battery operated or optional docking station for charging the battery. The unit will run from 100 - 250 volts, 50 or 60 hz supply. PurgEye® 1500 Site IP68 with PurgeNet™ IP65 with the lid open, IP68 with lid closed. Flow detection for accurate reading of gas samples. Power on / off with standby button for sensor warm up. Internal rechargeable battery or mains power operated. Recharging carried out via PurgeNet™.

The HW-S model is made of aluminum, is compact, lightweight and easy to move thanks to the base with 12.5 cm wheels. in diameter with brake. It is activated by a system of pulleys and ropes that raise the blade to the desired position. Designed to support mobile gates, bars, shutters and, in general, any obstacle that does not exceed a load of 200 kg. This product includes a practical instruction manual and CE marking in accordance with safety regulations.

Weld stainless steel tubes economically and with high quality using the TIG welding procedure: unique in the world, HX orbital welding heads are the best solution for high quality and efficient production thanks to their automated welding technology . Pre-mounted tube elbows (eg in heat exchanger construction), even those in tight bundles of tubes, can be attached to small stainless steel tubes reliably, quickly and safely. The narrow HX headers allow the construction of very compact heat exchangers with a high density of tubess and, therefore, a high degree of efficiency. Its compact design makes it easy to use.

AMOB's MB H range for forming is capable of processing tubes up to 250mm outside diameter (OD), covering a wide range of industrial sectors. The main characteristic of these machines is the hybrid movement control. This means that there's a combination of hydraulic and electrical axes. Produced by default with three automatic forming stations, these machines also have the possibility of being equipped with additional stations and rotary stations for forming and machining. Additionally these range can incorporate a punching station. Machines with greater versatility for the execution of the most complex end-forming jobs. This perfect combination allows servo-controlled hydraulic forming, greater precision due to its exchange of electrical stations and rotary tools with up to 2 axes for applications such as thread opening or burr trimming. The total productive autonomy of the AMOB group provides flexibility when it comes to customizing products for our partners, everything is possible, from simple stations, rotary stations or even a combination of these two types.

We manufacture Hydraulic Cylinder Components: Piston seals / Sellos de pistón Rod seals / Sellos de vástago Guide rings / Anillos guía O-rings / Juntas tóricas (O-rings) Wipers / Rascadores Dust seals / Guardapolvos Cushion seals / Juntas de amortiguación Sealing plugs / Tapones de sellado

Movotec is a hydraulic height adjustment system that combines great power and durability with a smooth and safe adjustment movement. The system consists of a group of up to four hydraulic cylinders connected by a flexible tube to a hydraulic pump connected in turn to an activation mechanism. This mechanism can be a simple crank in manual systems or an electric motor. In both cases, regulation is achieved by displacing the fluid from the pump to the cylinders.