554 results found
    2. Stand 4F14

      LASER LEVANTE, S.A.

      TO BE To the three centers of cut of ños that we have, one of them of carbon steel and other fiber, we expand a center over cutting, incorporating the machine TruLaser 5040 fiber, 8kw and a box 4000 x 2000 mm., thus having three high cutting centers productivity and efficiency, with results of the highest quality. By bringing BrightLine incorporated, we get some cutting edges completely smooth in stainless steel. We cut Carbon Steel 25, Stainless and Aluminum 40, Brass, Copper and bronze 10. We advise on the choice of the most suitable steel, giving information technique on impact and tensile strength, thicknesses, finishes surface, application, corten steel, flame cutting, etc ... We have a large stock of steel sheets, in thicknesses that They range from 1.5 to 400 mm. and of the maximum dimensions existing in the market. Each steel sheet served, has a corresponding Quality certificate. according to the requested standard. Steel products in stock for quick availability. PLASMA It is based on the thermal and mechanical action of a gas jet heated by an electric current arc established between an electrode located in the torch and the workpiece. The jet Plasma launched against the piece penetrates the entire thickness to be cut, melting and expelling the material. Cut any material that is electrically conductive. Ideal for cutting highly alloyed steels and alloyed aluminum medium or high thickness. Very suitable for cutting sweet steels up to 40 mm. from thickness. Very low heat input during cutting. High cutting speed, in some cases up to 10 times that of the oxycut. Clean cuts without further treatment. Possibility to bevel the cut. Possibility of greater thicknesses (see). OXICORT We have four flame cutting centers, capable of cutting steel with pinpoint accuracy. Process that uses a combustible gas, whose effect is to produce a flame to heat the material and oxygen as a oxidizer, in order to cause oxidation required for the cutting process. Suitable for medium and high thickness range. Possibility to bevel the cut. Specialists high thickness of 500 mm. FOLDING, ASSEMBLY, PAINT AND FINISH We have expanded the folding section, with two new machines Last generation. We give the possibility of supplying PARTS AND SUBJECTS completely finished: Folding, Welding, Countersunk Threading, Painting, Mounting. IRON ROLL AND NON-FERRIC PRODUCTS CARBON STEEL, STAINLESS, ALUMINUM, BRASS, COPPER, BRONZE, CALIBRATES, ETC. CONSTRUCTION STEELS CORTEN steel. S355J0WP, S355J2G1W, S355J2G2W / S355J2W + N • F-1430, 50 CrV4 / Chrome, Springs and leaf springs. • S355 J2 + N / J2 G3. Carbon • C-45, F-114 (F-5). Manganese • 42CrMo4, F-1252. SPECIAL STEELS ANTIDESASAS: • 320 HB, 400 HB, 450 HB, etc. FOR PRESSURE CONTAINERS, BOILERS AND DEPOSITS, RESISTANT TO LOW TEMPERATURES: • 265 GH, HII. Acer or for boilers. • SA 516 GR 60/70 N + S5. Boilers and pressure. • P355 NL1 (TSTE-355) / P460 NL1 (TSTE-460). Low temperatures. FOR HALF AND HIGH TEMPERATURES: • 16Mo3 (15Mo3) / 13CrMo4-5 / 10CrMo910.

      • 5 Products
    5. Stand 4B10

      LASIT LASER IBERICA

      LASIT is a company that develops laser marking and engraving technologies and does so with passion and dedication. We are big enough to make a difference, but small enough to take care of every single customer. Our Study and Design team ensures traceability, production chain control, brand visibility and industrial process automation. Our qualified salesmen and technicians are always available to respond to the needs of our customers to guarantee the very best service.

      • 4 Products
    6. Stand 6A17

      LASTEXE GROUP S.L.

      Somos un equipo formado y con una dilatada experiencia en el suministro de herramienta y maquinaría especial destinada a labores de montaje y mantenimiento de instalaciones de tubería en el sector energético y en la industria en general. Lo que al inicio se limitaba a utillaje y equipos destinados a labores de Expansionado de tubería, Corte y Biselado de tubería, Precalentamiento y Tratamiento térmico de soldaduras, a día de hoy nuestra oferta se ha ampliado y contamos con una gama extensa de herramienta hidráulica, neumática y eléctrica especiales destinadas a los sectores Oil & Gas , Petroquímicas, Refinerías, Minerías, Centrales nucleares, Industria Naval, Marina, Eólica, Aeronáutica, Ferroviaria, Agroalimentaria, etc. Todos nuestros productos provienen de fabricantes internacionales de reconocido prestigio y una larga existencia en el mercado . Nuestra oferta se completa con un servicio de asistencia tanto pre como post venta y un servicio de alquiler en determinados equipos.

      • 11 Products
    7. Stand 4B23

      LEMAR LEBEN GROUP, S.L.

      Lemar is your industrial technology partner in machining and end-to-end project outsourcing. We are focused on offering a comprehensive solution in the field of outsourcing of metalworking and electronics engineering and manufacturing for manufacturers or creators looking to develop or improve their machines, components, or industrial products. Our core business is industrial machining, with more than 30 CNC machines, including lathes, horizontal and vertical milling machines, and another 70 specialized machines or auxiliary production equipment. We work for various sectors, which allows us to understand the main raw materials we work with. Aluminum, carbon based steel, stainless steel, conventional and technical plastics, titanium, steel casting, aluminum casting... At Lemar, we perform mechanical, electrical, electronic, and pneumatic assemblies for both mass-produced and special-purpose machinery. Providing final assemblies for our clients has created the need to incorporate in-house auxiliary processes such as laser engraving, sandblasting, induction hardening, packaging in an ISO-7 clean room... Lemar offers its clients comprehensive service throughout the product lifecycle, reaching out to the client's needs. We participate from the initial stages of product development with our engineering department, from the client's idea to the product's market launch.

      • 3 Products
    9. Stand 6C28

      LIKALE CAUCHO INDUSTRIAL, S.L.

      Established in 1977, is part of the Likale Cauchopren Group. It has extensive knowledge and experience in the roller coating sector with elastomer materials, this places Likale as a benchmark company in the market. Based on this know-how and direct communication is capable to offer custom-made solutions for the client’s requirements. These are LIKALE’s key aspects: - Compound design and manufacture. - Constructive coating design with maximum reliability. - High quality finishes. - Customer-oriented service. Likale offers the best solutions for the roller coatings as well as their complete maintenance. The objective is to supply the best manufacturing and maintenance services of elastomer coatings for rollers. Likale’s professional team is permanently available to handle any needs which may arise in the roller coating sector.