CEMVI CATENA ELEVACION MANUTENCION VICINAY, S.A
About us
Vicinay Cemvisa is part of the VICINAY Multinational Industrial Group, with more than 200 years of business experience. It is a company specialized in the manufacture of lifting equipment (crane bridges, feathers, electric chain and cable hoists, manipulators, etc.) and high strength chain Grade 100 and Grade 80; With a great experience in the industrial sector.
Vicinay Cemvisa promotes the values of the constant search for excellence, meticulousness at work, the desire to improve and understand that our activity makes no sense if we fail to have satisfied customers, who have obtained from the company the maximum that it can offer them . International vocation with presence in the 5 continents and more than 40 countries.
Products
ELECTRIC CHAIN HOIST FROM 125 TO 5.000 KG
Standard main features • High strength lightweight aluminium alloy body. • Greased and sealed for life bearings and gears. • High efficiency load limiter, bathed in oil. • Grade 80 calibrated and hardened chain. • Failsafe motor brake or independent brake. • Built in chain collector. • Supply 230/400 V, 50 Hz. • Motor with insulation class F, protection IP 55. • Accessible control box. • Pendant with emergency stop button. • Factory tested with 25% overload. • Upper and lower limit switches. Options • Low voltage 48 V control in ABK 051 and ABK Mini. (standard on rest of models) • Plug in pendant control. • Beam trolleys - choice of push, geared and electric travel. • Low headroom trolley. • Other voltages or frequencies. • Radio control. • Other speeds. • Special paint (outdoors, marine, offshore). Espectro de carga Load scope Valor medio cúbico del estado de cargas Cubic average value Clase de funcionamiento Working class T0 T1 T2 T3 T4 T5 T6 T7 T8 Tiempo medio de funcionamiento en horas/día Average working time in hours/day ≤0,12 ≤0,25 ≤0,5 ≤1 ≤2 ≤4 ≤8 ≤16 >16 L1 Ligero Light K≤0,50 M1 M1 M1 M2 M3 M4 M5 M6 M7 L2 Medio Medium 0,50<K≤0,63 M1 M1 M2 M3 M4 M5 M6 M7 M8 L3 Pesado Heavy 0,63<K≤0,80 M1 M2 M3 M4 M5 M6 M7 M8 M8 L4 Muy pesado Very heavy 0,80<K≤1,00 M2 M3 M4 M5 M6 M7 M8 M8 M8 Límites de
ELDCTRIC WIRE ROPE HOIST FROM 250 TO 80.000 KG
Main characteristics • Structural frame in steel S275JR. • Gears in oil bath. • Electronic overload limiter. • Motor with electromagnetic disk brake. • Motor with insulation class F. • Motor protection IP55. • Tropicalized motor. • Slotted drum for the lifting wire rope. • Wire rope guide for the correct winding of the wire rope in the drum. • Power supply 400 V III - 50 Hz. • Control voltage 48 V - 50 Hz. • Control panel box placed in the hoist itself. • Pendant pushbutton with emergency stop. IP65 protection. • Upper and lower limit switches. • Lifting hook in accordance with DIN 15401, over push ball bearings and with safety latch. • Factory tests in accordance with EN14492-2. • Standard indoor painting. • Design and construction in accordance with the C.E. Machine Directive.
OVERHEAD, GANTRY & JIB CRANES
They can be single or double girder, depending on the load to lift, dimension, gabarite and configuration of the building. The power supply line can be driven by means of a festoon system or a PVC enclosed conductor system. For outdoors use, the hoist, motors and gear boxes, are protected against water. Standard range: - Single girder: up to 25 t and 30 m span. - Double girder: up to 50 t and 40 m span. Other capacities and dimensions can be offered under request.
VIC - RAIL
The VIC RAIL® system is a closed running rail supplied in three different formats: • VIC RAIL® 125, in bars up to 6 m long. • VIC RAIL® 195, in bars up to 8 m long. • VIC RAIL® 195R, in bars up to 9 m long. This rail model is designed for overhead suspension of light and medium weight loads, up to 2.000 kg, depending on the rail model. The raw material used is cold rolled steel section, S235JR quality and welded with an automated welding cell to guarantee rigidity, quality and the maximum repeatability in manufacturing. The calculation system used is in accordance with UNE-EN- 13001 standard. The deformation is lower than 1/350 of the distance between the two suspended ends, measured with the nominal load. All VIC RAIL® suspension systems are supplied with the corresponding safety cables, to secure the installation. The VIC RAIL® system enables loads to be moved with effort of 1 to 2% of the total suspended load.
HAND TROLLEYS
General Features Steel wheels, with ball bearings, made to fit any type of beam profile. Removable shafts. Side plates of pressed steel, with ribs that ensure high rigidity. Adjustable to any beam width by adjusting the number of washers. The chain wheel of the geared trolley is made of pressed steel plate conformed in order to ensure perfect fitting of the chain. Designed, manufctured and tested in accordance with the European Machines Directives and the F.E.M. Standards
HIGH RESISTENCE HOIST FROM 500 TO 20.000 KG
General Features Pressed steel body Shafts, pinions and hooks made of high resistance steel. Grade 80 load chain. Hooks, gears and shafts with ball bearing. Instantaneous self operated brake. Safety factor: 5. Options Zinc plated chain. Stainless steel chain. ATEX execution.
LEVER HOIST FROM 250 TO 9.000 KG
General Features Pressed steel body Shafts, pinions and hooks made of high resistance steel. Grade 80 load chain. Hooks, gears and shafts with ball bearing. Instantaneous self operated brake. Safety factor: 5. Options Zinc plated chain. Stainless steel chain. ATEX execution.
VACUUM SYSTEMS
System in modular construction. Accoustical and optical warning device in case of power supply failure. Vacuum gauge within visual range. Oilfree vacuum pumps (220 - 380 V). Safety tank and non- return valve. Control through manual slide valve. Ergonomic manipulating handle. Spring with guides mounted suction plates to assure the correct settlement of the suction plates. Lacquered in blue colour (RAL - 5015) and galvanized. According to UNE-EN13555 and UNE-EN14238:2005+A1.
VIC 8 CHAINS FOR LIFTING PURPOSES
Chains manufactured according to EN 818. High toughness and resistance to traction to avoid the effects of the impact load. Link marking to ensure the chain identification and traceability. Security on every link. Quality is a permanent exigence, assured by the most exhaustive controls: - Pulling Test during manufacture process. - Proof Lod to the 100% of the links, according to the Standard. - Tensile and bend deflection test. - Visual inspection and dimensional controls at all stages of manufacture. Surface finishes on application.