FRONIUS ESPAÑA S.L.U
About us
Fronius España began its trajectory in Spain in 2009 with the Solar Energy Business Unit (photovoltaic technology), which was joined in 2012 by the Perfect Welding BU (welding technology) and in 2017 by the Perfect Charging BU (battery charging technology). Throughout these years, it has been expanding throughout Spain, positioning itself as a leader in quality and standing out for its innovative technology and advanced solutions.
Its headquarters, with more than 3,000 m2, is located in Getafe (Madrid); but it also has two other offices in Barcelona and Zaragoza, dedicated to the Welding Business Unit, thanks to which it provides support throughout Spain with outstanding professionalism.
Quality and continuous innovation are the main hallmarks of our welding technology solutions. Our main commitment is to provide the market with cutting-edge solutions in different areas, such as manual and robot welding, and automation, reinforced with high-quality professional service. Thanks to personalized planning, advice and repair as well as tailor-made service packages, we achieve high customer satisfaction. Our services include: technical courses and training, commissioning, manual and robotic welding tests, demonstrations, warranty extensions, maintenance and calibrations.
Finally, highlight Fronius awareness of sustainable development. Because the components of many of our products can be inspected and replaced individually, and because our technological solutions reduce both energy losses and gas consumption, we also contribute to the protection of the environment and the conservation of resources.
Products
iWave 230i AC/DC
Top quality: for every weld and every material: with its targeted heat input and improved ignition function, iWave gives you maximum control over your arc while significantly reducing ignition delays. All the operating controls on the iWave series have likewise been designed for maximum control. This makes the systems intuitive to use, leaving you free to concentrate solely on the challenges of your welding task. Highligts: - Targeted heat imputs: Maximum control over the weld pool - Intuitive operation: Dynamic Graphics-based menu navigation, in over 30 languages - Reproducible ignition process: Ignition delays reduced by up to 71% - Industry 4.0 ready: Contactless data transfer and authentication
Ignis 150/180
Every welding task is different. The seam must be able to withstand any load and every weather conditions, regardless whether you are deep underground or perched at a lofty height. And regardless of whether you have access to a stable grid or energy is being supplied by a generator. Guaranteeing consistent seam quality in confined spaces and adverse conditions is only possible with the right welding system. Whether conditions are dusty or damp, the focus is always on the weld seam. The new generation of Ignis 150/180 devices brings a high degree of flexibility. The integrated PFC (Power Factor Correction) technology supports the use of extremely long mains leads of up to 100 m in length. The operating concept has also become even more intuitive. Benefits: - Execellent ignition properties and high arc stability - Low weight and robust construction - Consistently high welding quality with PFC - Wide range of variants with additional options
Welding carriage FlexTrack 45 Pro
Whether on the construction site or in the factory, in bridge and steel construction, boiler, container, ship, rail vehicle or crane construction – the FlexTrack 45 Pro lends a consistently high and reproducible quality to both MIG/MAG and CMT processes. Three different rail types are available: - Flexible rails - Straight rails - Ring rails
TransSteel 2200
Whether the TransSteel multiprocess series is being used on a construction site, in a workshop, in agriculture, in metalworking trades, or for assembly, repair, and maintenance work, the devices easily master MIG/MAG, TIG, and MMA welding to the same high level. Benefits: Three processses on all devices Countless applications Ready to weld in three steps The TransSteel 2200 is a compact, 3-in-1 solution. It is the first single-phase inverter power source from Fronius that is also multiprocess-capable, bringing together MMA, MIG/MAG and TIG in a single device. The TransSteel 2200 is characterised by the intelligent design of the device, ease of use, robustness and a high level of reliability. Weighing only 15.5 kg, it is also one of the lightest devices on the market.
WeldCube: Welding data management
In the smart factory of tomorrow, the aim is to achieve production processes that are faster, more flexible, and more powerful, with the capacity for seamless integration. Welding data must therefore be subject to complete recording, documentation, and analysis in the field of welding technology, but data also need to be made available for other systems in the production environment. Fronius WeldCube software make it easier for the user to handle the wealth of data. Benefits: Saves time and costs Ensures safety in production Increases productivity
TPSi Robotics CMT: The perfect joint is possible
TPS/i Robotics is a milestone for automated welding production. The starting point for our development was the analysis of the specific challenges of robotic welding. Our goal was not isolated detail improvements, but a systematic approach that combined the intuition and intelligence of a human with the productivity of a machine. Thanks to the modular design of the TPS/i and the Welding Packages, it is possible to create tailored solutions quickly and efficiently. The TPS/i can be configured differently to suit the customer’s needs. WP Standard and WP Pulse are available as standard, which can then be upgraded to LSC, PMC and/or CMT if required. Benefits: Efficiency Reliability Quality
CWC-S Cobot welding cell
The CWC-S offers a high level of flexibility for welding different components, thus providing the ideal conditions for cost-effective welding. Precision welding torch movements create high-quality reproducible welds every time. From batch size 1 to small series. Operation can be learned in just a few hours and no knowledge of programming is required. Trainees can learn how to use the CWC-S in no time, allowing them to take much of the strain off your specialist welders. The protective cabin and welding fume extraction system provide safety.
iWave Pro
Top quality – for every weld and every material: with its targeted heat input and improved ignition function, iWave gives you maximum control over your arc while significantly reducing ignition delays. All the operating controls on the iWave series have likewise been designed for maximum control. This makes the systems intuitive to use, leaving you free to concentrate solely on the challenges of your welding task. Highlights: -Targeted heat imput -Intuitive operation -Reproducible ignition processes -Industry 4.0 ready -Multiprocess Pro
Artis 170/210
The Artis is a completely digitised TIG DC power source. Alongside the different power categories from 80 to 500 A, the devices also vary in their mobility – from the mobile, portable device to the stationary, high-power complete system. However, they all have one thing in common – an extremely robust design for a long service life and an exceptionally self-explanatory operating concept. When developing the Artis 170/210, our focus was entirely on the benefit for our customers. What is needed is absolutely clear: a perfect, stable arc. The higher operating frequency of the inverter technology makes this stability possible - due to precise control. Other benefits of this optimized process technology are maximum efficiency in the duty cycle, the output power and the mains voltage supply. Last but not least, this increased efficiency also makes welding more enjoyable!
MagicCleaner 150
With the MagicCleaner device series, we provide you with innovative technology for the treatment of TIG weld seams and stainless steel surfaces. Cleaning, polishing and labeling of stainless steel are possible with it. In contrast to mechanical or chemical cleaning, the material surface is not affected. No exposure times are required. And an additional passivation process is no longer necessary. Ready to use in 2 steps and with only 4.5 kg an absolute lightweight. The MagicCleaner 150 is the perfect companion on the construction site or in the workshop. Advantages: - Cleaning and passivation in a single working step - Cost-effective electrolyte consumption - Ready for use in max. 3 steps - Innovative inverter technology
MIG/MAG welding torches
From difficult to access components to remote job sites, welding torches from Fronius are designed to cover an extremely broad range of applications. Hosepacks up to 15 meters long and torch bodies of different lengths and angles make life easier for every welder, not to mention the remote control in the handle on certain models. Welders can count on the flexibility they need with Fronius – guaranteed.
TIG welding torches
A large or small handle for ergonomically correct handling? An amperage regulator or even a JobMaster display to control the power source during welding via the welding torch? Or perhaps you need various gas nozzles and torch bodies for greater component accessibility? The new TIG welding torches can be customized to suit the welder’s personal preferences as well as the application at hand. Their modular design offers a range of sustainable and cost-effective options.
Exento HighVac
The Exento HighVac portable high vacuum extraction equipment has a very high quality filter that allows to retain more than 99.9% of the particles to minimize exposure to welding fume. The combination of the high vacuum extraction equipment with the powerful extraction torch allows welding fume to be captured directly at the source. This equipment is equipped with an extra-large, vertically mounted filter cartridge, which guarantees highly effective cleaning. Advantages: - High extraction capacity thanks to side channel blowers - Combines perfectly with Exento fume extraction torches - Automatic volumetric flow control - Intuitive, single-button operation, even while wearing gloves - Infinitely variable pre-selection of the extraction capacity for use with a wide variety of fume extraction torches - Extraction capacity monitoring
Exento extraction systems LowVac y HighVac
Thanks to its particularly high filter quality, the Exento HighVac mobile high vacuum extraction system removes more than 99.9 % of captured welding fume particles, resulting in significantly lower welding fume exposure. In combination with the powerful Exento fume extraction torch, the high vacuum system captures the welding fumes directly at the source. It is equipped with an extra large, vertically mounted filter cartridge, thereby ensuring particularly effective cleaning. Main advantages: - High extraction capacity thanks to side channel blowers - Combines perfectly with Exento fume extraction torches - Automatic volumetric flow control - Intuitive, single-button operation, even while wearing gloves - Infinitely variable pre-selection of the extraction capacity for use with a wide variety of fume extraction torches - Extraction capacity monitoring The Exento LowVac mobile low vacuum extraction system protects users from welding fumes in an effective manner and is highly cost-effective thanks to its long service life. It has a disposable filter with a particularly large filter area at 25 m2, which is replaced with a clean one when saturated. Main advantages: - Less need to reposition the extraction arm thanks to flow-optimized design of the extraction hood - Increased safety thanks to the filter and phase monitoring - Optimum protection thanks to contamination-free filter replacement - Highly cost-effective thanks to large capacity and long filter service life
TPS/i for MIG/MAG welding
The TPS/i is one of the most state-of-the-art welding systems and, with its huge power capacity of up to 600 A, it meets the highest demands for steel, stainless steel, and aluminum applications. The intelligent equipment, modular structure, and multitude of expansion options of the welding system provide the necessary flexibility and efficiency for all manner of applications. With the TPS/i, you already have the perfect solution for tomorrow’s challenges at your fingertips, so you can fully unleash your welding potential. Highlights: - Easy to operate thanks to touch display with customizable screen in over 30 languages - Support from stabilizers: Penetration and arc length stabilizers deliver high weld quality - Maximum flexibility through expandability with software packages (Welding Packages) - Future- Proof welding thanks to the user-oriented, continuous development of application software, welding torches, and other components, the TPS/i adapts effortlessly to all welding challenges. Compact welding systems: TPS/i 270 C and TPS/i 320 C Welding systems with external wirefeeders: TPS/i 320 / 400 / 500/ 600
Vizor Air/3X Crystal
Vizor Air/X3 Crystal is an eye and respiratory protection system that protects the health and safety of welders while ensuring comfort. In addition to proven anti-glare technology, the respirator unit ensures a constant supply of air and reliable protection against particles, welding fumes, and dust. The airflow has a cooling effect and ensures pleasant and comfortable work. This system is ideal for work in environmental conditions that do not allow optimal extraction of welding fumes, for example, flexible welding work or work in confined spaces or highly contaminated environments.
Welducator Simulator
Risk-Free Welding: Virtual training provides a safe, affordable, and resource-conserving way to realistically simulate complex welding processes. Those new to welding can repeat jobs as many times as necessary, improve their skills in a safe environment, and learn from their mistakes as a result. This is an ideal way to prepare apprentices for real-life welding situations and enables them to respond quickly and effectively to the ever-changing requirements of the labor market and industry. This tool, along with the associated Welducation Campus platform, offers students and instructors a comprehensive training system that includes theoretical content and virtual training units with a simulator.
Soldadura Cobot: Mobile, Single y Dual
The Fronius Cobot CWC-mobile welding cell offers a portable cobot welding solution. Its compact design, which includes a transport unit with wheels and adjustable legs, makes it easy to move the welding cell between large components. The CWC-mobile meets legal safety requirements, is CE-certified, and has a portable anti-glare protective screen (EN ISO 25980) in the form of a safety curtain. The table also allows for easy welding in small batches. Highlights: -Portable and flexible -CE-certified safety -Collaborative work