Gys Iberia 1964 SL

NEOPULSE 220 C

The NEOPULSE 220 C is a single-phase pulsed MIG/MAG generator with digital technology. Designed for the highest performance level using the latest technology, it features numerous synergic curves and exceptional arc quality/ performance. Intuitive and highly functional, the digital interface allows for quick and easy modifications of the welding parameters. Fitted with an accurate and powerful 4 drive roll feeding system, the NEOPULSE 220 C offers manufacturers maximum productivity. MULTI-PROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.0 mm - aluminium wire: Ø 0.8 to 1.2 mm - CuSi and CuAl wire: Ø 0.8 to 1.0 mm MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 5 mm). TIG DC Lift / Pulse. SMART SYNERGIC mode: After selecting 2 criteria (material/gas combination and the wire diameter), NEOPULSE automatically works out the optimal welding conditions while still allowing you to adjust the settings (wire feed rate, voltage, current, arc length). ACCURATE Calibration of the wire feed speed to adjust the displayed voltage measurement and refine the energy calculation. Energie, display and energy calculation after welding based on standards EN1011-1, ISO / TR 18491 and QW-409. Portability : load/backup user JOBS and machine configuration from a USB key. Traceability : trace / record all welding steps, cord by cord, during industrial manufacturing in line with standard EN ISO 3834. OPTIMISED MIG/MAG SETTINGS Welding processes: Manual, Dynamic STD, Pulsed, Arc Module (variation of hot / cold current) TACK modes: SPOT and DELAY. Trigger options supported: 2T and 4T. Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill, Postgas, etc.

NEOPULSE 320 C

The NEOPULSE 320 C is a digital 3 phase MIG/MAG pulse welding machine. Designed for the highest performance level using the latest technology, it features numerous synergic curves and exceptional arc quality/performance. User friendly and highly practical, the digital interface is designed for quick and easy adjustments of the welding parameters. Equipped with a precise 4-Roll drive system, this powersource provides unparalleled productivity and welding quality on all types of materials. MULTI-PROCESS WELDING MIG/MAG : - steel wire: Ø 0.6 to 1.2 mm - stainless steel wire: Ø 0.8 to 1.2 mm - aluminium wire: Ø 0.8 to 1.2 mm - CuSi and CuAl wire: Ø 0.8 to 1.2 mm MMA DC / Pulse: basic, rutile and cellulosic electrodes (up to Ø 5 mm). TIG DC Lift / PULSE SMART SYNERGIC mode: After selecting material/gas combination and the wire diameter. NEOPULSE automatically works out the optimal welding conditions while still allowing you to adjust the settings (wire feed rate, voltage, current, arc length). ACCURATE Calibration of the welding cables and motor speed, in order to adjust the voltage displayed and refine the energy calculation. Energy, display and energy calculation after welding based on standards EN1011-1, ISO / TR 18491 and QW-409. Portability: load/save user JOBS and machine settings using a USB stick. Traceability: track / record all welding steps, weld by weld, during industrial manufacturing in line with standard EN ISO 3834. OPTIMISED MIG/MAG SETTINGS Welding processes: Manual, Dynamic STD, Pulsed, Arc Module (variation of hot / cold current) TACK modes: SPOT and DELAY. Trigger options supported: 2T and 4T. Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Fill, Postgas, etc.

NEOPULSE 500 G

Digital technology, the NEOPULSE 500 G is a pulsed MIG/MAG welding power source with a separate wire feeder. Ultra high performance and designed for the highest performance level using the latest technology, it features +100 synergic curves and exceptional arc quality/performances. Intuitive and highly functional, its digital interface allows you to change welding parameters with ease. Equipped with its NEOFEED-4W reel (optional), this welding power source provides productivity and quality of unmatched welding on all types of alloys. MULTI-PROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.2 mm MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 6 mm) TIG DC lift / Pulse. SMART SYNERGIC mode : Select the material/gas type and wire diameter, now the NEOPULSE automatically determines the optimal welding conditions and allows you to adjust the settings (wire feed speed, voltage, current, arc length). ACCURATE Calibration of welding accessories, to adjust the displayed voltage measurement and the energy calculation. Energy, display and energy calculation after welding according to EN1011-1, ISO / TR 18491 and QW-409. Portability : load / save as, JOBS from a USB key as well as the machine configuration. Traceability : trace / record all welding steps, weld by weld, during industrial manufacturing according to EN ISO 3834. OPTIMISED MIG/MAG SETTINGS Welding processes : Manual, Dynamic STD, Pulsed, Modul Arc (variation of hot / cold current) TACK modes : SPOT and DELAY. Trigger management : 2T and 4T. Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope, Downslope, Crater Filler, Postgas, etc.

NEOCUT 105

The NEOCUT 105 is a plasma cutter with a duty cycle of 100% at 105 A for cutting work up to 50 mm thick in industrial environments. It is equipped with automatic air pressure management, in all modes, offering optimum cutting quality throughout the lifespan of the consumables. Can also be connected to a cutting table, its «Marking» mode is perfect for tracing and identifying parts. SYNERGISTIC AIR PRESSURE Automatic management of pressure and air flow rate whatever the torch length and the operating mode (cutting, gouging and marking) Optimised consumable lifespan MAXIMUM PRODUCTIVITY Duty cycle 100% A at 105 A (40°C). Marking mode, ideal for tracing and identifying parts. Cuts all material types (mild, stainless, tempered, HLE), aluminium, copper, etc. Optimized cooling design to operate in an industrial environment. Connectable via an optional CNC kit for use on an automated cutting table. Reinforced structure IP 23. SIMPLE TO USE User friendly interface with OLED display (7 languages). 6 modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger, Cutting of perforated sheets, Marking. Meter for checking the wear of the consumables (tip and electrode). Pneumatic diagnosis (moisture presence test and compressor control). HF-free ignition to prevent disturbances that could damage nearby electronic equipment. Simplified software update via USB cable without any tools or disassembly. HIGH-PERFORMANCE TORCH Premium torch available in 2 lengths and 2 shapes (manual and straight for automation) Large choice of consumables adapted to all thicknesses. Designed to be shock and heat resistant. Quick connection/disconnection of the torch, no tools required for transport or maintenance. Easy to use trigger mechanism for added comfort.

NEOCUT 125

The NEOCUT 125 is a plasma cutter with a duty cycle of 100% at 125 A for cutting work up to 57 mm thick in industrial environment It is equipped with an automatic air pressure management, in all modes, offering an optimum cutting quality throughout the lifespan of the consumables. Also connectable to a cutting table, its «Marking» mode is perfect for tracing and identifying parts SYNERGIC AIR PRESSURE Automatic management of pressure and air flow independent of the torch length and the operating mode (cutting, gouging and marking) Optimised consumable lifespan MAXIMUM PRODUCTIVITY Duty cycle 100% at 125 A (40°C). Marking mode, ideal for tracing and identifying parts. Cuts most materials (mild, stainless, tempered, HLE), aluminium, copper, etc. Optimized cooling design to operate in an industrial environment. Connectable through one of the 3 optional CNC kits for use on automated cutting table. Reinforced case IP 23. SIMPLE TO USE Ergonomic interface with OLED screen (7 languages). 6 working modes: Cutting, Cutting with locked trigger, Gouging, Gouging with locked trigger, Cutting of perforated sheets, Marking. Counter to follow the wear of the consumables (nozzle and electrode). Pneumatic diagnosis (moisture presence test and air pressure control). HF-free arc ignition to prevent disturbances that could damage nearby electronic equipment. Simplified software update via USB cable without any tools or disassembly. HIGH-PERFORMANCE TORCH Premium torches available in 2 lengths (6 m / 12 m), 2 types (manual / automatic) and 2 powers for automated cutting (125 A / 160 A). Large choice of consumables adapted to all metal thicknesses. Designed to be shock and heat resistant. Quick connection/disconnection of the torch, without tools required for transport or maintenance. Easy to use trigger mechanism for more comfort.

NEOFEED 4W

Designed to work exclusively with NEOPULSE power sources, the separate NEOFEED 4W wire feeder allows for very precise configuration and control of the welding cycle. Its intuitive digital interface makes it easy to act on the welding parameters. Its ultra-precise drive system offers industrialists maximum productivity on all types of materials.

COOLING UNIT WCU1KW B

TIG TITANIUM 400 AC/DC

The TITANIUM 400 AC/DC is a high-performance TIG AC/DC generator (400 A to 60%) designed to offer a wide choice of welding processes (TIG AC, DC, MMA). It can be used to weld all types of materials; mild steel, stainless steel, aluminium, copper, titanium. Also ideal for welding thin gauge, its Pulse mode reduces heat input and provides better arc control. Intuitive and highly functional, its digital interface allows you to change welding parameters with ease.

PROTIG 201L AC/DC

The PRO TIG 201L AC/DC is the professional TIG welding solution for welding all types of metal up to 4 mm thick (steel, stainless steel, aluminium, copper or titanium). It ensures a very high level of precision in many areas such as fabrication, maintenance or piping. Equipped with a cooling unit, it allows the use of more ergonomic TIG torches.

POWERDUCTION 37LG

The POWERDUCTION 37LG provides instant and powerful heating to release, or simply heat, steel or aluminium. Light and portable, this device can also heat metallic parts continously for several minutes without interruption thanks to its water-cooling system.

NEOMIG-i 500G

The NEOMIG-i 500 G is a three-phase, multi-process power source with separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies make set-up considerably easier, and reduce spatter during welding. When equipped with the WF wire feeder, the machine offers precise control of the welding parameters in order to deliver the best possible results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (polarity reversal) : Ø 0.9 to 2.4mm MMA DC / Pulse: basic, rutile and cellulosic electrodes. TIG DC Lift / Pulse. Air-arc gouging. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. PREMIUM WELDING High duty cycle of 60% at 500A. Digital arc control with instantaneous ignition. Very stable arc which helps to reduce welding spatter. Compatible with WF 35 and WF 50 wire feeders. MAXIMUM CONNECTIVITY Traceability of all weld beads according to EN 3834. Calibration mode for welding accessories in order to amend the voltage displayed. Connectable via an optional kit (062993) for use with robotic systems. User mode to share the product between multiple operators. Free online tool to customise the interface. Compatible with KOOLWELD 2 cooling unit (075115). Optional Push-Pull torch connection (078741) for WF 50 wire feeder

NEOMIG-i 400 G

The NEOMIG-i 400 G is a three-phase, multi-process power source with separate wire feeder. Its advanced digital technology and 100% duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies make set-up considerably easier, and reduce spatter during welding. When equipped with the WF wire feeder, the machine offers precise control of the welding parameters in order to deliver the best possible results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (polarity reversal) : Ø 0.9 to 2.4mm MMA DC / Pulse: basic, rutile and cellulosic electrodes. TIG DC Lift / Pulse. Air-arc gouging. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. PREMIUM WELDING High duty cycle of 100% at 400A. Digital arc control with instantaneous ignition. Very stable arc which helps to reduce welding spatter. Compatible with WF 35 and WF 50 wire feeders. MAXIMUM CONNECTIVITY Traceability of all weld beads according to EN 3834. Calibration mode for welding accessories in order to amend the voltage displayed. Connectable via an optional kit (062993) for use with robotic systems. User mode to share the product between multiple operators. Free online tool to customise the interface. Compatible with KOOLWELD 2 cooling unit (075115). Optional Push-Pull torch connection (078741) for WF 50 wire feeder

TITANIUM 230 AC/DC

The TITANIUM 230 AC/DC FV is a single-phase AC/DC TIG welding Power Source. Intelligent and conneced, it offers extremely precise arc control and industrial welding performance up to 230 A (16 A fuse) thanks to integrated power factor correction. It combines excellent ergonomic design and user experience, with advanced welding functionality. 6 TIG WELDING MODESDC Standard: smooth welding on the majority of ferrous materials. DC Pulse: allows welding while minimizing heat input (up to 2.5 kHz). FastPulse: pulses up to 20 kHz for specialised steel applications AC AC Standard: welding of aluminum and its alloys (Al, AlSi, AlMg, AlMn, etc). AC Pulse: precise penetration regulation, controllable by adjusting the AC pulse frequency (up to 500 Hz). AC Mix: alternates between AC and DC currents to increase welding speed. TIG WIZARD SOLUTION Patented synergic mode for maximum productivity with welding and tacking of Aluminum, Steel, Stainless Steel and Copper parts, with or without the need for filler material. 5 types of assembly: End to end (BW), Lap (FW), Interior angle (BP), Exterior angle and wire fusion. Wizard Lab for the creation of bespoke welding cycles. OPTIMIZED SETTINGS 4 spot modes: - Spot / Multi Spot: traditional spotting before welding thin sheets. - Tack / Multi Tack: ultra-precise pointing without oxidation, reducing the risk of workpiece deformation. 3 types of arc ignition: Standard Lift, High-Frequency (HF) and Touch.HF (timed high-frequency ignition). 3 triggering options: 2T, 4T and 4T LOG Configuration of AC waveforms enabling closer arc control and penetration. E-TIG mode guarantees the machine to respect the selected welding parameters, regardless of the position of the torch in relation to the workpiece (welding energy control).

KRONOS 250M

The KRONOS 250M is a single-phase multi-process inverter welder. Its innovative technology ensures excellent arc characteristics for the most demanding MIG/MAG applications. The integrated synergies make adjustments much easier, and reduce welding spatter. Its bright and intuitive interface allows precise control of welding parameters, so that the highest possible results can be achieved. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.2 mm - aluminium wire: Ø 0.8 to 1.2 mm - flux-cored wire (inverted polarity) : Ø 0.9 to 1.2 mm MMA DC / Pulse: basic and rutile electrodes. TIG DC Lift / Pulse. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. New intuitive and multilingual 3.5’’ HMI. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Job) for recurring tasks. Portability function, the ability to load/save/transport user JOBS and machine configuration via USB stick. On-demand ventilation system to reduce dust ingress, and increase energy efficiency. PREMIUM WELDING Digital arc control with instantaneous ignition. Very stable arc which reduces welding spatter. Four-roller wire feeder with digital encoder for smooth operation. 2 DISPLAY MODES Easy - streamlined interface, suitable for the vast majority of users to help achieve the best possible weld quality. Expert - dedicated interface for the most experienced welders, allows the user to adjust all the parameters of the welding cycle. ERGONOMIC Reinforced wheels for stability and manoeuvrability. Gas bottle support up to 4 m3 (20 L). IP23S rated to withstand difficult environments. Storage compartment. Convenient polarity change available on the front panel.

KRONOS 250T

The KRONOS 250T is a three-phase multi-process inverter welder. Its innovative technology ensures excellent arc characteristics for the most demanding MIG/MAG applications. The integrated synergies make adjustments much easier, and reduce welding spatter. Its bright and intuitive interface allows precise control of welding parameters, so that the highest possible results can be achieved. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.2 mm - aluminium wire: Ø 0.8 to 1.2 mm - flux-cored wire (inverted polarity) : Ø 0.9 to 1.6 mm MMA DC / Pulse: basic and rutile electrodes. TIG DC Lift / Pulse. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. New intuitive and multilingual 3.5’’ HMI. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Job) for recurring tasks. Portability function, the ability to load/save/transport user JOBS and machine configuration via USB stick. On-demand ventilation system to reduce dust ingress, and increase energy efficiency. PREMIUM WELDING Digital arc control with instantaneous ignition. Very stable arc which reduces welding spatter. Four-roller wire feeder with digital encoder for smooth operation. 2 DISPLAY MODES Easy - streamlined interface, suitable for the vast majority of users to help achieve the best possible weld quality. Expert - dedicated interface for the most experienced welders, allows the user to adjust all the parameters of the welding cycle.

KRONOS 320T

The KRONOS 320T is a three-phase multi-process inverter welder. Its innovative technology ensures excellent arc characteristics for the most demanding MIG/MAG applications. The integrated synergies make adjustments much easier, and reduce welding spatter. Its bright and intuitive interface allows precise control of welding parameters, so that the highest possible results can be achieved. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.2 mm - aluminium wire: Ø 0.8 to 1.2 mm - flux-cored wire (inverted polarity) : Ø 0.9 to 1.6 mm MMA DC / Pulse: basic and rutile electrodes. TIG DC Lift / Pulse. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. New intuitive and multilingual 3.5’’ HMI. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Job) for recurring tasks. Portability function, the ability to load/save/transport user JOBS and machine configuration via USB stick. On-demand ventilation system to reduce dust ingress, and increase energy efficiency. PREMIUM WELDING Digital arc control with instantaneous ignition. Very stable arc which reduces welding spatter. Four-roller wire feeder with digital encoder for smooth operation. 2 DISPLAY MODES Easy - streamlined interface, suitable for the vast majority of users to help achieve the best possible weld quality. Expert - dedicated interface for the most experienced welders, allows the user to adjust all the parameters of the welding cycle ERGONOMIC Reinforced wheels for stability and manoeuvrability. Gas bottle support up to 4 m3 (20 L). IP23S rated to withstand difficult environments. Storage compartment. Convenient polarity change available on the front panel.

KRONOS 400T G

The KRONOS 400T G is a three-phase, multi-process power source, with separate wire feeder. Its innovative technology ensures excellent arc characteristics for the most demanding MIG/MAG applications. The integrated synergies make set-up much easier, and reduce spatter during welding. In combination with the optional WF 35 wire feeder, it allows precise adjustment of welding parameters to help achieve excellent results. MULTI-PROCESS MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.2 mm - aluminium wire: Ø 0.8 to 1.2 mm - flux-cored wire (inverted polarity) : Ø 0.9 to 1.6 mm MMA DC / Pulse: basic and rutile electrodes. TIG DC Lift / Pulse. INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. New bright and user-friendly 3.5’’ HMI. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Job) for recurring tasks. Portability function, the ability to load/save/transport user JOBS and machine configuration via USB stick. On-demand ventilation system to reduce dust ingress, and increase energy efficiency. PREMIUM WELDING Digital arc control with instantaneous ignition. Very stable arc which reduces welding spatter. Four-roller wire feeder with digital encoder for smooth operation. 2 DISPLAY MODES Easy - streamlined interface suitable for the vast majority of users to achieve the best possible weld quality. Expert - dedicated interface for the most experienced welders, allows the user to adjust all the parameters of the welding cycle. ERGONOMIC Reinforced wheels for stability and manoeuvrability. Gas bottle support up to 10 m3 (50 L). IP23S rated to withstand difficult environments. Large storage compartment. 4 lifting points for easy handling and safe transport.

KRONOS 400T DUO

The KRONOS 400T DUO is a multi-process three-phase inverter welding machine with a modular design, meaning it can be equipped with a separate wire feeder (optional) for efficient working with two different types of wire. Its innovative technology ensures excellent arc characteristics for the most demanding MIG/MAG applications. The integrated synergies make adjustments much easier, and reduce welding spatter. Its bright and intuitive interface allows precise control of welding parameters, so that the highest possible results can be achieved. MULTI-PROCESS MIG/MAG: It can be equipped with an optional separate WF 35 wire feeder, allowing to quickly switch between 2 different types or diameters. - steel and stainless steel wire: Ø 0.6 to 1.2 mm - aluminium wire: Ø 0.8 to 1.2 mm - flux-cored wire (inverted polarity) : Ø 0.9 to 1.6 mm MMA DC / Pulse: basic and rutile electrodes. TIG DC Lift / Pulse INTELLIGENT Specific synergies for: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas and thickness, the product automatically determines the optimal welding parameters. New, intuitive, and multilingual 3.5’’ HMI. Full machine software and synergy updates available via USB stick. Storage of up to 200 welding programs (Job) for recurring tasks. Portability function, the ability to load/save/transport user JOBS and machine configuration via USB stick. On-demand ventilation system to reduce dust ingress, and increase energy efficiency. PREMIUM WELDING Digital arc control with instantaneous ignition. Very stable arc which reduces welding spatter. Four-roller wire feeder with digital encoder for smooth operation. 2 DISPLAY MODES Easy - streamlined interface suitable for the vast majority of users to achieve the best possible weld quality. Expert - dedicated interface for the most experienced welders, allows the user to adjust all the parameters of the welding cycle.

AIR/WATER WIRE FEEDER WF 35

Designed to work with KRONOS and NEOMIG-i power sources, the WF 35 portable wire feeder has an impressive duty cycle of 60% at 500A. The 4 roller feed system and encoder controls provide a precise and smooth wire feed for all types of materials. The 3.5» colour screen is easily accessible and the interface is very intuitive, with 2 distinct display modes: Easy or Expert. PERFORMANCE MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.2mm - aluminium wire: Ø 0.8 to 1.2mm - CuSi and CuAl wire: Ø 0.8 to 1.0mm - flux-cored wire (inverted polarity) : Ø 0.9 to 1.6mm INTELLIGENT Synergies: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas, and thickness of the workpiece, the product automatically determines the optimal welding parameters. Full machine software and synergy updates via USB stick. Storage of up to 200 welding programs (Job) for recurring tasks. Portability function, ability to load/save/transport user JOBS and machine configuration via USB stick. Calibration procedure for welding accessories in order to correct the voltage displayed. Free online tool for interface customisation. Intelligent wire loading with torch length management. SUPERIOR WELDING Duty cycle 60% at 500A. 4 roller wire feed motor with digital encoder for effective feeding. ERGONOMIC Multilingual 3.5’’ colour interface. Compatible with air and liquid cooled torches with the MIG-i interconnection cable. Optional flowmeter kit (073395) for precise control and adjustment of torch gas flow. Easy access to interconnection cable terminals with locking system.

AIR/WATER WIRE FEEDER WF 50

Designed to work with KRONOS and NEOMIG-i power sources, the WF 50 portable wire feeder has an impressive duty cycle of 60% at 500A. The 4 roller feed system and encoder controls provide a precise and smooth wire feed for all types of materials. The 5» colour screen is easily accessible and the interface is very intuitive, with 2 distinct display modes: Easy or Expert. PERFORMANCE MIG/MAG: - steel and stainless steel wire: Ø 0.6 to 1.6mm - aluminium wire: Ø 0.8 to 1.6mm - CuSi and CuAl wire: Ø 0.8 to 1.6mm - cored wire (inverted polarity): Ø 0.9 to 2.4mm INTELLIGENT Synergies: Steel, AlMg, AlSi, CrNi, CuSi. After entering 3 pieces of data: Wire diameter, material/gas, and thickness of the workpiece, the product automatically determines the optimal welding parameters. Full machine software and synergy updates via USB stick. Storage of up to 200 welding programs (Jobs) for recurring tasks. Portability function, ability to load/save/transport user JOBS and machine configuration via USB stick. Traceability of all weld beads according to EN 3834. Calibration procedure for welding accessories allows adjustment of the voltage displayed to ensure parameter accuracy. User mode for allocating the product between several operators. Free online tool for interface customisation. Intelligent wire loading with torch length management. SUPERIOR WELDING Duty cycle 500 A at 60%. 4 roller driven motor reel with digital encoder for perfect feeding. ERGONOMIC Multilingual 5’’ colour interface. Compatible with air and liquid cooled torches with the MIG-i interconnection cable. Push-Pull torch connection option (078741). Led lighting of the feed motor and spool. Viewing window to monitor wire consumption. Large roller diameter (Ø 37mm) for optimal wire delivery. Quick-change rollers with no need for tools. Colour coded rollers to easily differentiate wire diameter. Optional flowmeter kit (073395) for precise control and regulation of the gas flow of the torch.

COSMOS 500 G

PROGYS 400

TITANIUM 321 AC/DC

KRYPTON 401 DC

PROTIG 231

MULTIWELD 400T G