SPECTRO Hispania, S.L.
About us
SPECTRO is one of the worldwide leading suppliers of analytical instruments, employing optical emission (Arc/Spark OES, ICP-OES) and X-ray fluorescence spectrometry (XRF) technology, used for the elemental analysis of materials in industry, research and academia. SPECTRO is a member of the AMETEK Materials Analysis Division.
Products
SPECTRO xSORT Metal
The SPECTRO xSORT XHH04 is a handheld X-ray fluorescence (XRF) analyzer designed for fast and accurate metal testing, capable of identifying 46 elements across 16 metal matrices in just 2 seconds (7 seconds for light elements such as Al, Si, or Mg). It offers on-site calibration for specific applications, optimized ergonomics for all-day single-hand operation, an easy-to-read display, and fast Android-based software. Equipped with GPS, camera, WiFi, Bluetooth, USB, and microSD, it enables full documentation and data transfer, and can be transformed into a mini-lab when connected to its docking station.
SPECTROPORT
-Unlike handheld XRF, the SPECTROPORT accurately analyzes elements like C, P, S, B, Li, Be, Ca, Si, Mg and Al even at low and critical levels, in only a maximum of 10s -Consistent results with unique new iCAL 2.0 one sample standardization combined with self-adjusting optical system – resilient to ambient temperature changes and saves on average 30 minutes per day -Effortless point-and-shoot analysis, battery powered operation – up to 800 measurements on a single charge When handhelds aren’t enough, the amazing new SPECTROPORT portable metal analyzer applies more advanced OES technology — in a unit as easy to use as a handheld analyzer. SPECTROPORT delivers many advantages of SPECTRO’s portable OES flagship, SPECTROTEST, in a smaller, lighter package. It accurately analyzes elements such as carbon, sulfur, phosphorus, and boron. It’s as fast as an XRF, with many analyses taking only a few seconds. And it enables effortless point-and-shoot performance, to minimize operator intervention and decision-making. It adds the convenience and simplicity of the best handheld analyzers to the accuracy and wide analytical range of SPECTRO’s renowned OES technology. You get fast, ready response; flexible portability; intuitive ease of use; and minimal standardization efforts. Predefined calibration packages and the new SPECTRO exclusive iCAL 2.0 calibration logic system eliminate repeated calibrations and delays. Perform a single-sample standardization (less than 5 minutes) at the start of the day’s testing and you’re all set. Your iCAL diagnostics ensure stable performance throughout a typical day. And now iCAL 2.0 helps maintain the same standardization — regardless of most temperature shifts.
SPECTROTEST - The arc/spark mobile metal analyzer for precise analysis without compromise
SPECTROTEST - The arc/spark mobile metal analyzer for precise analysis without compromise - No compromise: high resolution optical system for probably widest element range (even N, Li, Na), all elements necessary for a complete metal analysis on the spot are available - Unique iCAL one sample standardization – saves on average 30 minutes per day - Flexible point-and-shoot analysis with various quick to change sample probes, battery powered operation – up to 800 measurements on a single charge The SPECTROTEST is a mobile arc spark spectrometer ideal for many applications in the metal producing, processing, and recycling industries. This mobile metal analyzer flaunts its superior performance especially when exact metal analysis is required, when materials are difficult to identify or when there is a large number of samples to be tested. The complex arc spark spectrometer design offers many ergonomic advantages for safe and fatigue-free onsite operation. The light, thin probe is quickly converted between arc excitation and spark excitation (arc spark OES). A probe with an integrated UV optic is available for special measuring applications; in its newest version it can also be utilized with arc excitation. This arc spark spectrometer is even able to identify low alloy steel with the carbon content during the rapid arc excitation mode. In spark mode, the SPECTROTEST’s analysis of carbon phosphorous and sulfur are potential applications in addition to the identification of duplex steels using the nitrogen content.
SPECTROCHECK – The highest performance and dependability at the lowest possible price
Ideal for metal testing and quality control of iron-, aluminum- and copper-based samples; as well as dedicated solder bath analysis Ultra-fast one sample standardization – based on SPECTRO´s Intelligent Calibration Logic (iCAL) – saves on average 30 minutes per day Industry unique app-like concept for user-friendly software operation The SPECTROCHECK stationary metal analyzer is specifically designed to meet the performance requirements — and the budgets — of small and medium-size foundries and machining operations. This high-quality, compact, affordable instrument is ideal for routine analysis of elemental content in iron-, aluminum-, and copper-based metals. Companies using SPECTROCHECK can assure their customers that their metals have been reliably tested to meet the most rigorous specifications for content and quality.
SPECTROMAXx – The Metal Analyzer of Choice – Worldwide
SPECTROMAXx – The Metal Analyzer of Choice – Worldwide - Ideal for routine analysis and precise analysis of all incoming/outgoing materials and for process control (including Nitrogen) in foundries – covering 10 matrices, 65 methods and 54 elements, at low operating costs and minimal maintenance requirements - Simple standardization with only one sample – based on SPECTRO´s Intelligent Calibration Logic (iCAL) – saves on average 30 minutes per day - Excellent ease of use for effortless operations – simplified operator view presents clear choices via dedicated toolbar buttons
SPECTROLAB S– Ultimate performance for the next generation of metal analysis
SPECTROLAB S - SPECTRO, the arc/spark innovation leader, has spent 40-plus years developing superlative OES instruments. Recently it’s perfected solid-state detectors using proprietary CMOS+T technology to revolutionize high-end arc/spark OES analysis — with SPECTROLAB S. This instrument’s efficiency and economy are continuously improved by systematic voice-of-customer inputs and rigorous usability testing. So now a fully reimagined software suite brings even more functional, customizable ease of use. Argon consumption is reduced by up to 50 % in standby mode and by 13 % when measuring samples. A fast analysis program enables 12-second measurement of main alloying elements in some key metals. And trace limits of detection (LODs) for high-purity copper are improved by 30 %. SPECTROLAB S is designed to supply the fastest possible measurements; greatest throughput; lowest limits of detection; longest uptime; and most future-proof flexibility available. It’s the instrument of choice for primary and secondary metal producers, automotive and aerospace manufacturers, and makers of finished and semifinished goods.