UE Systems Europe B.V.
About us
At UE Systems, we believe that every person regardless of their industry, company size, experience and budget should have the tools and support to help their facilities operate more efficiently, reliably, and safer. We do this by providing a portfolio of ultrasound solutions designed to be versatile and simple to use.
Since 1973, we’ve helped thousands of customers across the world prevent equipment failures, identify energy losses, and return home safe to their families and we are just getting started.
Applications of ultrasound for industrial maintenance, reliability & condition monitoring:
- Condition-based Lubrication of Bearings
80% of premature bearing failure is caused by poor lubrication practice. You can dramatically reduce this number if you know exactly when and precisely how much lubrication your equipment needs at any given time. Never under or over lubricate your bearings again.
- Bearing Condition Monitoring
Use ultrasound to eliminate guesswork and easily identify the earliest stage of bearing failure, protect your bearings and assets from breakdowns, and prolong the life of your assets.
- Leak Detection
30% of all compressed air produced is wasted due to leaks. Not only do compressed air leaks cost money, but they also reduce equipment running hours, add unnecessary wear and tear on equipment, and can be a safety risk for employees.
- Steam Trap & Valve Inspection
Defective steam traps and valves will waste energy and create safety hazards such as water hammer. Using ultrasound, you can inspect any type of steam trap and easily determine its operating condition.
- Partial Discharge Detection
Performing electrical inspections of equipment provides both practical and safety challenges. Ultrasound is a safe and effective way to inspect your electrical assets at all voltage levels, allowing you to scan enclosed gear before opening for further inspection.
Products
Ultraprobe 100
A Practical Tool for Leak Detection The Ultraprobe 100 is a reliable and cost-effective ultrasound instrument. This instrument is an easy-to-use ultrasonic leak detector for compressed air leaks and steam traps and valve tester that can save your facility time, energy, and money. Since the Ultraprobe 100 requires minimal training, it is the perfect introduction tool for any inspector beginning to implement an ultrasound program in their facility. Easy-to-Use - Minimal training required - Ideal for troubleshooting - Compact ultrasonic instrument - Affordable instrument that saves time, energy, and money - Can be used for compressed air/gas leaks, steam traps and valves - Immediate impact in your facility - 8-position sensitivity dial with dB indications - LED bar graph display for calculating dB levels - Replaceable 9 Volt Alkaline Battery The Ultraprobe 100 is a practical tool for any leak detection, steam trap inspection, or mechanical troubleshooting program.
Ultraprobe 3000
The Digital Ultraprobe Solution for Energy Saving The Ultraprobe 3000 is an advanced digital ultrasonic leak detector specializing in compressed air, leak detection, and steam traps. This instrument is versatile and offers reporting capabilities such as on-board data logging. Use this instrument with our Ultratrend DMS software to create reports, allowing you to download leak data, add comments and pictures, and export leak data in excel. This also works seamlessly with the new Leak Survey SideKick App. Why choose the Ultraprobe 3000? Versatile and Easy-to-Use - Accurate and repeatable digital data with 400 storage points - Ideal for point and shoot trouble shooting and energy conservation programs - Wide, dynamic sensitivity range On-Board Data Logging - Compatible with DMS software - Works seamlessly with the New Leak Survey SideKick App - Download, manage, and export leak data via USB connection Lightweight Easy-to-Read Digital Display Panel Store, overwrite, or enter data in new location This Ultraprobe 3000 provides the perfect balance for identifying and reporting energy losses!
Ultraprobe 9000
Expand Your Inspection Capabilities with Digital Ultrasound Technology The Ultraprobe 9000 is a digital ultrasonic instrument that specializes in bearing condition monitoring, compressed air leaks, along with steam traps and valves. This instrument combines the best of both worlds by scanning as quickly as analog instruments while also using digital information to store and trend data with the push of a button. The Ultraprobe 9000 is an intrinsically safe instrument with the option of an ATEX model for use in rated areas. Why choose the Ultraprobe 9000? Versatile and Easy-to-Use - Minimal Training, Quick Learning Curve - Adjustable frequency between 20Hz-100kHz - Accurate and Repeatable Digital Data On-Board Data Logging - Compatible with DMS software - Download and upload data and routes Ideal for Troubleshooting and Data Collection Export Database and Report to Excel Trend Charts Interchangeable Modules The Ultraprobe 9000 offers the best combination of troubleshooting and route-based data collection. See the Ultraprobe 9000 in action and expand your inspection capabilities.
Ultraprobe 10.000
Complete Ultrasonic Asset Management System for Condition Monitoring The Ultraprobe 10.000 is an advanced ultrasonic instrument that can be used for all ultrasound applications. Ideally suited for condition monitoring of bearings and electrical inspections. This instrument brings ultrasound technology to a new level by allowing inspectors to record and analyze sound samples, and store and manage data. Versatile and Easy-to-Use - Bearing and electrical inspections - Leak Detection and Steam Trap Inspections - Condition monitoring analysis - Specialized Application Settings Reporting and Analytics - Advanced data collection and storage - Flexible reporting options - Compatible with DMS and Spectralyzer data analysis software Manage Routes with DMS Software Manage Routes with DMS Software Multiple Data Views Export Database and Report to Excel Create Analysis Reports Connect to Multiple Accessories for Easier Inspections Adjustable Frequency from 20kHz-100Khz Accurate and Repeatable Digital Data
Ultraprobe 15.000
All in one monitoring system. Every condition, analyzed. The Ultraprobe 15.000 uses ultrasound to analyze everything from bearings and electrical systems to steam traps and leaks. With an intuitive, built-in touch screen, this single hand-held tool can easily test and report on every aspect of a plant’s equipment. Use Intuitive Touch Screen Technology: - Analyze conditions with the on-board spectrum analyzer - See historical data and identify trends Collect and Analyze Data Faster: - Get instant temperature readings - Pinpoint locations with laser pointer Access multiple data screens: dB / temperature / spectrum analysis Plan and review routes, images, and sounds on-board Determine and store the RPM of a rotating asset with the fully integrated strobe light Photograph test points with on-board camera Review alarm groups and generate reports Store data, sound recordings, and images The most elaborate and efficient ultrasound data collection, inspection, and analysis instrument available today.
Ultraprobe 201: Grease Caddy
Avoid Early Bearing Failures – The Guessing Game is Over The Ultraprobe 201 Grease Caddy is designed to optimize time-based lubrication. The Ultraprobe 201 allows an operator to simultaneously lubricate and monitor ultrasound levels in bearings, keeping you from over lubricating them. Monitor Bearing Health - Identify bearing issues - Prevent over lubrication Monitor Bearings While Lubricating - Prolong the life of your equipment - Save on working hours and operational costs - Improve maintenance efficiency Easy-to-Read LEDs provide visual indication of ultrasound amplitude Built-In Lamp to Illuminate Dark Areas Swivel Base Adjusts to Odd Angles Heavy Duty Headphones for High Noise Environments Magnetically Mounted Transducer Belt Holster The Ultraprobe 201 Grease Caddy will extend the life of your bearings and equipment using condition-based lubrication methods that prevent over lubrication.
Ultraprobe 401: Digital Grease Caddy
Stay in the Sweet Spot – Lubrication Made Simple! The Ultraprobe 401 Digital Grease Caddy removes the guesswork of lubrication by allowing you to monitor the friction in your bearings, ensuring you are applying the right amount of lubrication. By moving from time-based monitoring to condition-based monitoring, you are setting yourself up for a more reliable and efficient maintenance program. You can also store and trend decibel levels so you always know the health of your bearings. Monitor Bearing Health - Lets you know when bearings are experiencing friction and how much grease is needed - Displays dB levels before and after applying grease - Trend bearing condition Optimize Your Lubrication Program - Record all lubrication data including dB levels, baselines, grease, etc. - Create lubrication routes - Cost analysis Two Display Panels (dB and dB with intensity bar graph indicator) Customized Settings Upload/Download Route Data Built-In Lamp to Illuminate Dark Areas Swivel Base Adjusts to Odd Angles Heavy Duty Headphones for High Noise Environments Magnetically Mounted Transducer Belt Holster The Ultraprobe 401 Digital Grease Caddy allows you to perfect your lubrication strategy and keep production running.
RAS - Remote Access Sensor
Quickly and easily inspect enclosed or hard-to-reach bearings with permanently mounted Remote Access Sensors.
Switch Box
Caja de conmutación RAS de UE Systems Cuando el acceso o la seguridad dificultan la inspección de un punto de prueba, la caja de conmutación RAS es su respuesta, ya que hace que la detección remota sea rápida, fácil y segura. Connect and test single or multiple points remotely. Permanently mount a RAS to a test point and run a coax cable to the Switch Box. Once connected, you may test up to 8 test points at a time. To test, attach a RAM (Remote Access Module) to the Switchbox, select a test point indicator and collect your data. It’s that easy! The UE Switchbox can be used with the Ultraprobe 9.000, 10.000, 15.000 and 401.
4Cast
Save time, save your bearings and improve plant reliability. The 4Cast is a permanently installed smart alert system that monitors bearing conditions by recording data and sounds 24/7. This device is perfect for critical equipment and slow-speed bearings, while also allowing you to set low -and high-level alarms and simultaneously send data and sound samples to specialized software for analysis and reporting, providing important information to determine the health of your bearings. Why choose 4Cast? 24/7 Condition Monitoring - Permanently installed transducers monitor bearing condition 24/7 - Low- and high-level alarms can be triggered should condition change - Sends recorded data and sound samples directly to DMS software Customization and Flexibility - Inspectors can schedule condition sampling by minutes, hours, days, etc. - Customized alarm levels - Customized reporting and analysis intervals Monitors up to four bearings Works together with Remote Access Sensors Highly Flexible Ethernet Connection Slow-Speed Bearing Inspection The 4Cast truly has you covered!
4Site
Online Monitoring Solutions for Critical Electric Transmission and Distribution Equipment The 4Site is an online monitoring solution for electrical transmission and distribution designed to reduce data overload by only transmitting optimized data. It continuously listens for the first signs of higher frequency sounds produced by arcing, tracking, and corona. These sounds are then analyzed through ultrasound spectrum analysis software. 24/7 Online Monitoring - The 4Site continuously listens for first signs of corona, arcing, and tracking - Safer and easier monitoring Optimized Data - Only transmits data that could be early signs of failure - Reduces data overload Designed to monitor up to 4 locations simultaneously Scalability Safely monitor your electrical equipment with the 4Site!
UltraTrak 850s
Improve your existing measurement and automation systems with Ultrasound The UltraTrak 850S Smart Analog Sensor is a modern ultrasound sensor and transmitter designed to detect early-onset failures in industrial equipment. The 850S works in tandem with existing plant automation and can be used for a wide range of applications including ultrasound condition-based lubrication, bearing fault detection, valve leakage, and steam trap issues. Why choose UltraTrak 850S? Easy Installation and Quick Start - Easy to install and connect to existing PLC, SCADA, DCS, or other plant technology within 10 minutes - Built with a patented auto-sensitivity adjustment, the 850S continuously monitors friction, impacting, and turbulence - Can be used to automate warnings in the event of bearing or lubrication failure Versatile by Nature - Can be used for condition-based lubrication, bearing fault detection, valve leakage, and steam trap issues - Reliable, ultra-fast way to start analyzing trends and making informed maintenance decisions - Supports any rolling element bearing at any speed – including slow-speed bearings as low as 1 RPM The 850S is built with precision quality and designed for durability Efficient and cost-effective The simplest and easiest way to add the benefits of ultrasound to your existing measurement and automation systems!
Si2-LD Acoustic Camera
The Si2-LD acoustic imaging camera enables you to detect and reduce leaks in facilities, thereby cutting costs associated with compressed air and specialty gas leaks. Beyond these capabilities, it also identifies mechanical faults, such as bearing issues, facilitating preventative maintenance to avoid downtime. The Si2 series delivers unparalleled performance, enhances decision support, simplifies fleet management, and integrates seamlessly with enterprise data, setting a new standard in its class. Why choose the Si2-LD Camera? Advanced Leak Detection - Detects, locates, and measures compressed air and gas leaks; including bearing fault detection, from up to 200 m (656 ft) away - Built-in measurement and cost analysis for industrial gases including ammonia, hydrogen, CO2, methane, helium, and argon - One-handed operation with automatic tuning, 8x zoom, and a 12 MP digital camera Mechanical Fault Detection - Mechanical fault mode, automatic selection, and optimization of filters simplifies finding critical mechanical issues, such as bearing faults - Packed with Features to Streamline Fleet Operations - Fleet management functionality for efficient tool usage and maintenance across large-scale operations Detecting and quantifying leaks in manufacturing, production, and assembly applications; in all applications using compressed air Early leak detection for enhancing safety and compliance while minimizing costly repairs Rapid, accurate leak detection, boosting efficiency and client satisfaction in compressed air and gas system maintenance Mechanical fault mode to detect faulty bearings to help plan repairs and avoid downtime
Si2-PD Acoustic Camera
The Si2-PD acoustic imaging camera helps you reduce maintenance costs for electrical equipment by offering an effective solution for partial discharge (PD) detection and response. This camera detects, locates, classifies, and assesses PD faults from up to 200 m (656 ft) away, identifying PD issues 30 times smaller than previously possible. It provides on-camera and software-based severity assessments, giving you the decision support needed for precise maintenance decisions. Why choose the Si2-PD Camera? Advanced Partial Discharge Detection - Identify PD 30x smaller than ever before - Fleet Management Functionality - On-camera and software-based severity assessment of PD issues, and PD type classification provides best-in-class decision support Ease of Use - One-handed operation with automatic tuning, 8x zoom, a 12 MP digital camera, and IP54 rating - Made for enterprise scaling through the use of fleet management functionality so that managers can ensure the tools are being used and maintained properly Monitor transmission & distribution conductors and components at long distances easily and reduce need for emergency repairs. Inspect substation transformers to detect PD issues early, before they result in a dangerous and costly explosion. Find PD issues in any piece of high-voltage equipment to reduce public complaints of radio interference and audible noise.
Si2-Pro Acoustic Camera
The Si2-Pro camera helps you significantly lower costs associated with mechanical bearing issues and partial discharge on electrical equipment. It also enables you to drastically reduce leaks in your facilities, cutting down expenses related to compressed air and gas leaks. With the Si2 series, you'll experience the best-in-class performance, decision support, fleet management, and enterprise data integration available. Why choose the Si2-Pro Camera? Advanced Leak, Partial Discharge, and Mechanical Fault Detection - Mechanical fault detection for early identification of bearing problems, preventing costly downtime - Quantify leak rate and cost of industrial gas and compressed air leaks, to prioritize repair and calculate savings - On-camera and in-software severity assessment and type classification of partial discharge (PD) issues Ease of Use - Automatic frequency tuning, 8x zoom, 12 MP digital camera,IP54 rating, and a QR code reader - Fleet management functionality for efficient tool usage and maintenance across large-scale operations Ideal for routine inspections and preventative maintenance in various industrial settings. Ensures adherence to safety standards by identifying potential hazards in bearings and gas systems. Aids in managing and reducing operational costs through early leak detection and analysis. Mechanical fault mode to detect faulty bearings to help plan repairs and avoid downtime.