SPECTROTEST - The arc/spark mobile metal analyzer for precise analysis without compromise - No compromise: high resolution optical system for probably widest element range (even N, Li, Na), all elements necessary for a complete metal analysis on the spot are available - Unique iCAL one sample standardization – saves on average 30 minutes per day - Flexible point-and-shoot analysis with various quick to change sample probes, battery powered operation – up to 800 measurements on a single charge The SPECTROTEST is a mobile arc spark spectrometer ideal for many applications in the metal producing, processing, and recycling industries. This mobile metal analyzer flaunts its superior performance especially when exact metal analysis is required, when materials are difficult to identify or when there is a large number of samples to be tested. The complex arc spark spectrometer design offers many ergonomic advantages for safe and fatigue-free onsite operation. The light, thin probe is quickly converted between arc excitation and spark excitation (arc spark OES). A probe with an integrated UV optic is available for special measuring applications; in its newest version it can also be utilized with arc excitation. This arc spark spectrometer is even able to identify low alloy steel with the carbon content during the rapid arc excitation mode. In spark mode, the SPECTROTEST’s analysis of carbon phosphorous and sulfur are potential applications in addition to the identification of duplex steels using the nitrogen content.

The Speedy contour is ideal for precise deburring, chamfering and edge rounding of internal and external contours on small and flat workpieces. The Speedy contour has a wear-resistant and ground work plate. It is also optionally available with speed control and suction nozzle. The Speedy Kontur is available in the versions type 270 and 320, this refers to the table top size. Thanks to the brushless motor, the machine is suitable for continuous use. The Speedy 210 PSL edge processing machine with sliding carriage is designed for edge trimming and sanding small to medium-sized workpieces from 1 mm thick. For high-alloy materials, the standard speed range of 10,000 to 30,000 rpm can be adapted to 2,800 to 7,400 rpm by means of a technical modification. Thanks to the brushless motor, the machine is suitable for continuous operation. We recommend for both machines an industrial vacuum cleaner with automatic switch-on to ensure cleanliness at the workplace. This also increases the service life of the spindle.

A welding helmet of the next generation – developed for perfect results The sphereX combines design with the technical innovations for a clear and colour-realistic view of the weld pool with full protection.

At DENIOS, we specialize in providing safe and compliant solutions for the storage of hazardous substances. Spill containment pallets are one of our key products, designed to prevent environmental risks and ensure workplace safety. Engineered to collect leaks, spills or accidental drips, our containment pallets help prevent soil and water contamination, supporting full compliance with APQ regulations and current environmental legislation. We offer a wide range of models in galvanized steel, painted steel, stainless steel and polyethylene, allowing compatibility with a variety of substances—flammable, corrosive, aggressive or polluting. With different sizes and capacities available, our pallets are suitable for storing small containers, 200-liter drums or 1,000-liter IBCs. Practical features such as removable grids, forklift-accessible designs, efficient stacking, and racking compatibility make integration into industrial environments simple and efficient. Our spill pallets are widely used in industries such as chemicals, pharmaceuticals, food production, logistics, automotive, and metal processing, and are an essential tool for the safe, responsible and sustainable management of hazardous materials.

Our spin windows clear the view. When machine tools are in operation, the view into the interior is severely restricted by flying chips and cooling lubricant splashing around. Our SPINVISTA ensures a clear view of the manufacturing process: It rotates at such a high speed that liquids and debris are kept away from the disc. The result is a clear view of the manufacturing process. The SPINVISTA is available in two versions: SPINVISTA EVO with an outside diameter of 253 mm and a visible area of approx. 284 cm² SPINVISTA NEO with an outer diameter of 290 mm and a visible area of approx. 430 cm²

The right turn for your Machine Protection - Spiral springs from HEMA HEMA DURASPRING spiral springs protect spindles from soiling, which can affect the dynamics of the traversing movements. In this way, they maintain the functionality of the system and enable efficient, precise machining of workpieces. The optimum operating conditions for DURASPRING is in applications with oil. Mounting position The spiral springs are suitable for both horizontal and vertical installation. Vertically installed DURASPRING basically achieves longer extension lengths than horizontal versions. Vertical types have a high start-up force, which ensures that the DURASPRING will move out quickly during start-up / extension with machine movement. For horizontal use, the overlap between turns is increased during manufacture of the spring. In this way, "sagging" is reduced, especially with longer extension lengths, and the transverse stability is significantly improved. The DURASPRING spiral springs at a glance: - Inner diameter from 15 to 160 mm - Vertical separations up to 4,500 mm - Blued steel and stainless steel version - High quality spring steel bank of extreme hardness

SPITZNAS’s Atex Pneumatic Pipe Cutting Machine is ideal for safe and fast cutting of steel, ductile iron, non-ferrous metal, HDPE, plastic, cement and concrete pipe. Compact design with a fully enclosed blade guard to protect operator

The SPITZNAS pneumatic rotary hammer drills have a SDS-plus or SDS-max. tool holders, which permit drilling in concrete up to 40 mm. The percussive drills with pneumatic drive can be used in ATEX areas as well as underwater. The impact mechanism can be manually switched on and off.

We are suppliers and manufacturers of connecting rods forged with Split Forging technology.. Split Forging improves mechanical characteristics of the connecting rods as well as reinforcing the tightening torque of the screws between the head and connecting rod body. This technology (Split Forging) reduces the total production time of the connecting rods because it produces parts ready to separate foot and head directly from the forging process.

RANGE: 1" to 48" o/d (25 - 1,220mm) Larger sizes and customised machines available upon request. Try our small pipe cutting and beveling machines and split-frame clamshell today! Functions: External bevelling / internal bevelling / counter-boring / compound bevels / J-prep bevelling Materials: Any kind of steel and exotic alloy Power: Pneumatic, electric (110v or 220v), hydraulic or servo electric motor Our small pipe cutting and beveling machines and split-frame clamshells are second to none in the industry.

The TTS93 tool trolley is the new entry-level model in the series and features excellent functionality, is well equipped and has an attractive design. At STAHLWILLE, we do not make compromises. That is why our latest Tool Trolley model - the TTS93 - includes so many features from the tried-and-tested TTS series. ·Central locking ·High static load capacity ·Oil and add acid resistant, smooth- running wheels ·All drawers can be extended 100%. Equipment variants for every need The TTS93 tool trolley is offered by Stahlwille both empty and with a choice of three different tool compilations for industry, the trades and automotive. The versions with 111- and 135-piece tool sets are intended to provide an initial set of equipment, while the tool set with 168 items leaves nothing to be desired. Depending on the version selected, the equipment includes sockets, ratcheting bit-holders with sets of bits, screwdrivers, pliers and cutters through to fine-tooth ratchets. The 168-piece tool set also includes the MANOSKOP 721QR Quick, a clicking torque wrench with a permanently installed ratchet and QuickRelease safety lock for a measuring range from 40 to 200 Nm.

JG Automotive, is Scherdel Group Sales and Service Office (SSO) for Spanish and Portuguese market. Scherdel is one of the world leaders in the design and manufacture of springs and cold formed parts. Scherdel Group offers a wide portfolio of products and services, including: technical springs, piston rings, inlet and exhaust valve springs, cold formed and stamped parts, clamps, fine-blanking, assembled subassemblies, welded seat structures, Metal-plastic components, design of assembly processes, design and manufacture of production machinery, as well as surface treatments in its own facilities. An enormous capacity of designs adapted to technical specifications of every application, in the fields of: Automotive, Medical equipment, Electronic equipment, Electrical mobility, Design of Tools and machinery for the assembly processes. Scherdel offers its clients a wide knowledge in Research and Development (R&D) of components and manufacturing systems, improving and optimizing the design of each component and its manufacturing process, thus ensuring the quality and performance of the components manufactured. SCHERDEL is developing parts and assemblies for hybrid and purely electric units and produces them in mass(e-Mobility). They can be found in electrical machines, power electronics and energy storage systems. Metal and plastic composite materials are also used, such as laser-welded products made of highly purified copper. Scherdel has more than 125 years of history with continuous growth and a long-term commitment to its customers and collaborators, with a presence in 29 countries worldwide, allowing it to be considered a global company. TYPES OF SPRINGS: – Compression – Disc – Tension – Constant force and power spring – Piston ring – Seal ring – Spiral – Valve – Wave

We manufacture any type of spring with superalloys such as Inconel (600, 625, 718 or X750), Incoloy, Hastelloy, Nimonic, Monel, Phynox, MP35N, Waspaloy, Titanium, etc. from wire Ø 0.20 mm to Ø 20.00 mm.