The electropermanent square pole magnetic clamping plate is the perfect solution for clamping magnetic workpieces. The patented EPM magnetic clamping plates *** Patent-No. EP1874504 *** have a solid steel surface and are therefore significantly more resistant than conventional plates with epoxy resin against hot chips, coolant and other processing influences. The workpiece is clamped on the EPM magnetic clamping plate MAGNASLOT within seconds through an impulse current. This magnetic clamping plate allows for 5-side processing of your workpieces in only one clamp. This reduces equipping times to a minimum and increases productivity. Through the use of pole extensions, which adjust to the workpiece surface, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. The magnet field from the MAGNASLOT magnetic clamping plate guarantees low-vibration clamping of your workpieces. This protects the milling spindle as well as your tools, increases process safety and extends the service life. Electropermanent magnets combine both the electrical and thePermanent Magnet technology. These are permanent magnets that can be switched on and off electrically. Electropermanent magnets excel by their holding force which they do not even lose in case of a power failure. The electropermanent technology of the magnetic clamping plate with square poles guarantees the highest safety, because only a power impulse is needed for clamping. The workpiece is held on the magnetic clamping plate with reverse-pole permanent magnets.

Los elementos de fijación SITEC® son rápidos y eficaces, y han sido diseñados específicamente para la amortiguación o el aislamiento de vibraciones. El ruido y las vibraciones suelen provocar problemas: afecta al rendimiento de un producto que puede desgastarse antes de lo deseado, o su rendimiento puede empeorar, incluso, en casos extremos, la vida útil puede llegar a acortarse debido a algún fallo mecánico. Por ello, y en línea con la tendencia actual del NVH (Noise Vibration and Hardness: ruido, vibración y dureza), en Bölllhoff hemos creado esta línea de productos con la que nos hemos centrado sobre todo en evitar vibraciones en componentes tales como bombas, compresores y motores. Dentro de esta nueva gama, existen varios modelos de soluciones: de tuercas remachables, de clips o tornillos. Los productos SITEC® se emplean en sectores como la ingeniería sanitaria, eléctrica y la industria del automóvil. Las aplicaciones más habituales: radiadores, sistemas auxiliares de calefacción, conversores, etc. Hay cuatro variedades de elementos de fijación SITEC®: - SITEC® Rivet: Tuerca remachable para absorción de vibraciones - SITEC® Pin: Sistema de absorción con pin - SITEC® Clip: Sistema de absorción con clip para uniones roscadas - SITEC® Spring: Sistema de absorción con muelle y unión Encontrará más detalles sobre cada tipo de producto aquí: https://www.boellhoff.com/es-es/noticias/noticias/2020/tecnologia-absorcion-sitec.php

Ideal for large loads in demanding environments. Perfect to improve the material supply and achieve a more ergonomic and productive work environment.

Manageable and efficient, the Elevah 40 Move Picking is the self-propelled and ultra-compact picking machine that allows storage, organization and warehouse replenishment operations. Perfect for increasing the level of safety and optimizing times, it reaches a maximum working height of 4 meters. The Elevah 40 Move is an efficient solution for all goods picking operations: the picking table has a maximum load capacity of 100 kg and is electrically adjustable, allowing you to maintain an ergonomic position at all times and avoid physical strain. It is also available with manual plan (optional). Thanks to its small size (only 71.5 x 100 cm), this model is very practical and can be stored in a small space. The practical rudder allows maneuvering even in the smallest of spaces, making it easy to move from one area to another without leaving the basket. The Elevah 40 Move Picking offers numerous advantages in terms of work optimization, but also in terms of work safety. Thanks to the door lock, the basket cannot be accidentally opened. This aspect is a real guarantee of safety for the operator, who can work in complete peace of mind. In addition, to avoid unintentional activation, the driving helm is equipped with a safety device. To facilitate operations, it is equipped with an electronic and automatic parking brake. In addition, it is provided with integrated control systems and movement indicator lights. In the equipment and accessories section, you will find a list of standard components and accessories to customize the Elevah 40 Move Picking. Pick-up truck designed for the tire industry with the proper tool to lift a complete set of tires with a total weight of 120 kg directly from the ground. Operating temperature from -10º to 40º

Designed for picking, storage, organization of warehouses, shelves and logistics, Elevah 65 Move Picking is the picking platform that allows to work up to 6.5 m. The handy picking plate, foldable and electrically adjustable, allows to lift up to 100 kg. Compact - only 78x178 cm - and with a turning radius equal to zero that allow the operator to work quickly and comfortably. This platform is easy to drive even in the most narrow areas with little room for maneuver. The access is easy and safe thanks to the double side entrance. Work is safer but also faster and easier: thanks to the possibility to electrically adjust the plate, loading and unloading operations can be carried out ergonomically, reducing efforts as much as possible. Easy and handy to move, it can be driven with one hand thanks to the joystick. In the equipment and accessories section, you can find the list of standard components and accessories to customize your Elevah 65 Move Picking. FRONT, REAR AND CEILING ANTI-COLLISION RADAR BASKET BLOCK: max. 1,95 m BLUESPOT1 AND BLUESPOT2 (driving direction signalling light) ANTI-CRUSHING PROTECTION UNDER THE BASKET More Optional: DIFFERENT COLORING OF MACHINE UPON REQUEST DIRECTIONAL LOCKING OF SWIVEL WHEELS TRUCK LOADING AND UNLOADING SYSTEM

Self-propelled platform with electric elevation with a basket rotation system for working from different angles. MAX. WORKING HEIGHT: 6,5 m BASKET ROTATION of 180° COMPACT: only 78 cm wide MAX. CAPACITY: 120kg (1 Person) MANEUVERABLE: Turning radius = 0 COMFORTABLE: practical and safe access to the platform DOOR LOCK: it avoids accidental opening of the basket SPEED CONTROL: speed limiter with the basket on the ground INCLINOMETER: anti-tilting system DETECTORS: 3 acoustic and light presence indicators EMERGENCY DESCENT Elevah 65 TB is a self-propelled platform with electric elevation provided with a mechanical basket rotation system of 180° which allows the operator to regulate the angle and work in different position. It is ideal for carrying out industrial maintenance tasks in narrow spaces. Its small dimension (only 78x148cm) and the compact size allow the operator to move it easily even in the narrowest spaces. Easy and comfortable to maneuver, thanks to the joystick and the zero turning radius. In the equipment and accessories section, you will find the list of standard components and accessories to customize the Elevah 65 TB and adapt it to your needs. FRONT, REAR AND CEILING ANTI-COLLISION RADAR BLUESPOT1 AND BLUESPOT2 (driving directions signallung light) ANTI-CRUSHING PROTECTION UNDER THE BASKET MORE OPTIONAL DIFFERENT COLORING OF MACHINE UPON REQUEST DIRECTIONAL LOCKING OF SWIVELS WHEELS TRUCK LOADING AND UNLOADING SYSTEM Standard charger with retractable cable (Not included if the BKIT option is selected) The machine can work at temperatures between -15° C and +40 °C

The Elevah 80 ES Move is a compact platform with an extendable basket that allows you to reach a height of 7.56 m in complete safety. An ideal solution for plants, production lines and Industry 4.0. Its small size (only 78x153 cm) and its small support surface allow the operator to move it easily even in the smallest spaces. With its joystick and zero turning radius, it is easy and comfortable to drive. The basket is manually extended to 115cm, making it ideal for maintenance and repair work in industrial settings, on machinery, inside shops or malls, and in places where there are few obstacles to overcome. In the equipment and accessories section, you will find a list of standard components and accessories to customize the Elevah 80 ES Move and adapt it to your needs. ANTI-COLLISION RADAR (direction indicator light) ANTI-CRUSH PROTECTION UNDER THE BASKET ADDITIONAL OPTIONS DIFFERENT COLORS OF THE MACHINE ON REQUEST DIRECTIONAL LOCK OF SWIVEL WHEELS VAN LOADING AND UNLOADING SYSTEM Battery charger with retractable cable as standard (not available if BKIT option is selected) Operating temperature from –10º to 40º

Elevah E5 ES Move: aerial platform with extendable basket. Elevah 5 ES Move is a compact platform, ideal for maintenance inside stores, malls and industries. The basket manually extends up to 60 cm, allowing maintenance to be carried out in places where there are low or hard- level obstacles to overcome, such as working machines like CNC. Elevah 5 ES Move is characterised by its ease of maneuverability: it can be driven with one hand using the convenient joystick, it turns a full 360° thanks to its zero turning radius and it can move even in the narrowest spaces. Elevah 5 ES Move is self-propelled in height, so it can be driven without having to lower the basket, saving time in operations. The basket has a comfortable and safe access and it allows the operator to work at height portected on all sides, minimising the risk of injury. In the equipment and accessories section, you fill find the list of standard components and accessories to customize Elevah E5 ES Move and adapt it to your needs. FRONT, REAR AND CEILING ANTI-COLLISION RADAR BLUESPOT1 AND BLUESPOT2 (driving directions signalling light) ANTI-CRUSHING PROTECTION UNDER THE BASKET MORE OPTIONAL DIFFERENT COLORING OF MACHINE UPON REQUEST DIRECTIONAL LOCKING OF SWIVELS WHEELS TRUCK LOADING AND UNLOADING SYSTEM Standard charger with retractable cable (Not included if BKIT option is selected). The machine can work at temperatures between -10° C and +40 °C

Elevah E5 Move Picking is the ultra compact platform to carry out picking, storage, organization of warehouses, shelves and logistics. This platform stands out for its reduced size: only 70x115 cm, it can get through narrow spaces Incredibly easy to maneuver: thanks to the handy joystick it can be driven with one hand and thanks to the zero turning radius, the platform turns 360 degrees, simplifying the movements even in the most difficult areas. Elevah E5 Move Picking is the valid aid for picking goods: the picking plate has a maximum load of 100 kg and it is electrically adjustable, allowing to always maintain an ergonomic position and avoid physical effort. In addition to the advantages in terms of work optimization, Elevah 5 Move picking is equipped with different features that allow to work in a totally safe way: the door lock avoids accidental opening, it is provided with anti-tilting system and automatic and electric parking brake. Moreover, it comes with a system that allows emergency descent.It is possibile to increase the level of safety thanks to the wide range of accessories and customizations available for each model. Some examples: FRONT, REAR AND CEILING ANTI-COLLISION RADAR BASKET BLOCK: max. 1,95 m BLUESPOT1 AND BLUESPOT2 (driving direction signalling light) ANTI-CRUSHING PROTECTION UNDER THE BASKET More Optional: MANUAL AND REMOVABLE PICKING TRAY DIFFERENT COLORING OF MACHINE UPON REQUEST TRUCK LOADING AND UNLOADING SYSTEM

In case of conducted as well as field bound EMI disturbances, our split cable entry system EMC-KEL-DS and our split cable gland EMC-KVT-DS offer an effective way to divert and block those disturbances and provides an alternative to conventional EMC cable glands — especially when routing cables with connectors.

Interconnecting cables between equipment within electrical panels or machinery are the primary way in which interference (EMC) propagates to the external environment surrounding the equipment. A classic example is frequency converters and their connectors. MS series shielding clamps are the most important EMC solution for interference-free operation of the electrical system. The wide variety of models and the economical cost make these cable shielding systems very attractive and easy to install. The different options we offer are listed below: -Loose EMC cable shield clips. -EMC cable shield clips for DIN/Omega rails -EMC cable shield clips for bolt-on mounting -EMC cable shield clips for busbars -EMC cable shield clips for printed circuit boards Braided grounding tape Box of shielding clips

eFlexline – the agile production solution for electric motors Electric motor products range from 48V generators for on-board electrification to 400V motors for direct and hybrid drives to large 800V motors; this variability creates difficult challenges to implement cost-effective manufacturing processes. There is a wide range of versions and performance classes as well as different sizes, requirements, and shapes. The solution to this problem is the new eFlexline. We put our decades of experience in developing highly flexible production lines to work, leveraging our expertise in traditional assembly manufacturing and major turn-key projects to design a flexible, scalable, production solution for manufacturing electric motors independently of type: from Stator with hairpin technology to Rotor assembly to fully automatic Final assembly of the electric motor. We develop eFlexline solutions according to the individual requirements of your production need, without losing our focus on ensuring precise and efficient production. Each module is optimized for the processes and can be flexibly scaled or, alternatively, can be implemented as a stand-alone system. Standardized interfaces are used to handle components of different sizes, while simple automation systems configure production islands to manage the relevant product requirements and wire shapes – no need for additional machines or long conversion times.

End forming machines, electric and hydraulic. Single or multi-station. From diameter 8 mm to 350 mm