Cámaras de InGaAs con sensibilidad entre 900 - 1700 nm. La NIT-WiDy-Sens es la cámara ideal para testeo de electroluminiscencia y fotoluminiscencia. Sus caracteríticas la hacen la predilecta para inspección de paneles y huertos solares - imbatible rango dinámico 120dB, modo logarítmico sin TEC - modo lineal de alta sensibilidad, activa TEC - tamaño, peso y consumo muy reducidos, ideal para ambercar en drones u otros - 360x256 o 640x512 px Si necesita mayor resolución, la NIT-Sens-1280 ofrece una gran sensibilidad y resolución de 1280x1024px a un precio excepcional. Y para aplicciones e línea, la cámara lineal NIT-LiSa-SWIR con 2048x1 px ofrece una valocidad de captura de 60KHz. Somos los representantes en España y Portugal del líder tecnológico NIT.

Covering a capacity range from 6mm up to 90mm (OD), the versatile MDH range is the right choice for anyone starting in the world of bending, being a great choice as a complement to production, prototyping and even market validation. These electromechanical tube bending machines come with a modern industrial design, ergonomically optimized control panel, hydraulic mandrel extractor, clamp die, and pressure die. As a result it guarantees great quality bend finishes. Our MDH series, with NC carriage displacement axis on the CN3 versions, have a user-friendly interface and allows bending complex tube geometries within seconds of programming! CN1 version: 1 Automatic Axis: Bending CN2 version: 2 Automatic Axis: Bending and Rotation CN3 version: 3 Automatic Axis: Bending, Rotation and Feeding

The AMOB rotary draw bender can process tubes up to 127mm OD covering applications which require larger center line radius. Usually, these tubes do not require a mandrel which enables extremely quick tooling changeover and reduced setup time. Our PT range is capable of bending tubes with different shapes and materials, always guaranteeing a good finish and maximum speed! Compact machines, with the best technology and a powerful motor capable of working throughout the day. For AMOB, the safety of all equipments produced is a priority, to this end, all machines have a safety pedal that allows total stop at any time. With a 100% controlled system, PT machines also promote both reliability and repeatability.

Active anticorrosion technology engineered to protect metal assets and extend their operational lifetime.

This is how to simplify your procurement channels! A direct connection makes paperless processing a reality! By using different EDI connections in cooperation with Walter Martínez, you are well on the way to processing your orders and goods receipts entirely without paper. One thing is certain though: you will simplify and accelerate your procurement channels considerably. The connection of your IT system to the Walter Martínez SAP system is very flexible and the data interchange can take place in a wide variety of data formats: • EDIFACT • SAP IDoc • XML format • DATANORM • Transfer of fixed text files (.txt) • ”Excel“ formats • etc. IT direct connection Paper-free processing? That’s not a problem with Walter Martínez: via a defined interface with our external clearing centre. The connection of your IT system to the Walter Martínez ERP system is very flexible. Data interchange can take place in a wide variety of data formats such as: - SAP IDoc - EDIFACT - XML - Standardised and customised data formats (txt, Excel etc.)

Smart locks for different solutions. Developed to increase security and provide remote access control.

The electropermanent square pole magnetic clamping plate is the perfect solution for clamping magnetic workpieces. The patented EPM magnetic clamping plates *** Patent-No. EP1874504 *** have a solid steel surface and are therefore significantly more resistant than conventional plates with epoxy resin against hot chips, coolant and other processing influences. The workpiece is clamped on the EPM magnetic clamping plate MAGNASLOT within seconds through an impulse current. This magnetic clamping plate allows for 5-side processing of your workpieces in only one clamp. This reduces equipping times to a minimum and increases productivity. Through the use of pole extensions, which adjust to the workpiece surface, any unevenness on the workpiece can be compensated for and a deformation of the workpiece can be prevented. The magnet field from the MAGNASLOT magnetic clamping plate guarantees low-vibration clamping of your workpieces. This protects the milling spindle as well as your tools, increases process safety and extends the service life. Electropermanent magnets combine both the electrical and thePermanent Magnet technology. These are permanent magnets that can be switched on and off electrically. Electropermanent magnets excel by their holding force which they do not even lose in case of a power failure. The electropermanent technology of the magnetic clamping plate with square poles guarantees the highest safety, because only a power impulse is needed for clamping. The workpiece is held on the magnetic clamping plate with reverse-pole permanent magnets.

Manual and Automatic Lines of Chrome Plating and Galvanizing. Profile Anodizing Lines.

Electropolishing is an electrochemical treatment based on anodic dissolution that removes a thin layer of stainless steel in a controlled manner. It produces bright, uniform and passivated surfaces, reducing roughness, smoothing edges and eliminating micro-defects. It ensures parts that are easy to clean, decontaminated and provide maximum asepsis.

Electrostatic painting, also known as powder coating, allows for shorter application and curing times, increasing efficiency and reducing costs, with a uniform, high-quality finish preferred by the leading equipment manufacturers we work with. Parts undergo pre-treatment, including degreasing, cleaning, and phosphate application, to protect against corrosion and improve paint adhesion. Then, epoxy powder paint is applied using electrostatic charging by a specialized operator, ensuring full coverage of every contour of the part. The parts are then cured in an oven at temperatures between 160 °C and 200 °C, depending on the type of paint and material, creating the chosen final finish: smooth, textured, matte, glossy, etc. Each part is carefully inspected and packed, then sent for assembly or directly to the customer. At V Laser On, we work with leading suppliers such as AkzoNobel, Axalta, and Cin to ensure perfect final results.

Clamping element for welding tables with rear clamping TW28GRS • Metal cross pin. • Ribbed plate, ideal for holding round or square pieces. • Spindle on the outside to leave the work area free and avoid welding projections. • Special for small spaces. • Clamping force 5,000 N.

Böllhoff offers a comprehensive range of self-locking fasteners, the RIPP LOCK® family. The range of lock washers, nuts, and bolts ensures secure and reliable connections. RIPP LOCK® lock washers feature radial grooves on both sides. The angle of the groove pitch is greater than the thread pitch. Once the bolt and nut are in place, the radial grooves of the RIPP LOCK® lock washers engage with the underside of the bolt head, minimizing movement between the bolt head and the washer. RIPP LOCK® lock washers are highly reliable, even under continuous vibration or high stress. Their high hardness and strength make them suitable for all bolt classes up to size 12.9. RIPP LOCK® self-locking nuts and bolts also ensure reliable connections and require no additional components; their larger contact area eliminates the need for washers. Furthermore, the edges of the teeth are not sharp, which guarantees greater protection against corrosion at the joint, as the contact surface is not damaged.