Hunix is the new Hepyc range of universal tap screws. A proprietary innovation that has resulted in a tool capable of machining up to 80% of materials by itself. Can you imagine what it means for a distributor to reduce his references while increasing quality? And the optimization of the machining process of an industry? Decrease in production times, reduction of incidents, stock simplification… less problems! More efficiency! Moreover, thanks to our exclusive design and manu- facturing, we achieve over a useful life over 2 times longer and machining improvements. Discover our rango of HUNIX threading taps: HUNIX VAP, HUNIX TIN+, HUNIX PM

Our Weld Purge Monitors® have been specifically designed for excellent weld purge conditions, creating the best rust and discoloration free welds. The World standard PurgEye® 100 IP65 Hand Held Weld Purge Monitor® Push button ‘Auto Calibration’ feature at ambient (20.94%). Leak tight probe assembly. Low battery and low sensor indicator. Longer life sensor, 18 months approx. Quick connect/disconnect leaktight fittings for gas purge tubing. Tripod mount. PurgEye® 200 IP65 Hand Held with PurgeNet™ Battery or mains operated 90/250V single phase 50Hz or 60 Hz AC. Flow detection for accurate reading of gas samples. PurgEye® 300 Nano Low cost, small, lightweight “Entry Level” 1ppm Monitor®. Mains only. Operating voltage 110/230V single phase 50/60Hz. Supplied with an external 12V power supply unit (PSU). Input voltage range 90 to 260 AC. PurgEye® 500 Desk with PurgeNet™ Reads PPM or Percentage. Mains Operated. Supplied with an external 12V power supply unit (PSU). Input voltage range 90 to 260 AC. PurgEye® 600 Touch Screen with PurgeNet™ Reads PPM or Percentage. Large touch screen with on-screen graph of the current weld. PurgEye® 1000 Remote with PurgeNet™ Hand held display and a 10m lead as standard. Optional 100m reel of outdoor cable with locking connectors. Reels of extensions cable can be connected for leads upto 1 km! Easy to pull through pipes. 1” ø stainless sensor holder to place at the weld site inside pipes to send purge data to the monitor up to 1km away. Battery operated or optional docking station for charging the battery. The unit will run from 100 - 250 volts, 50 or 60 hz supply. PurgEye® 1500 Site IP68 with PurgeNet™ IP65 with the lid open, IP68 with lid closed. Flow detection for accurate reading of gas samples. Power on / off with standby button for sensor warm up. Internal rechargeable battery or mains power operated. Recharging carried out via PurgeNet™.

The HW-S model is made of aluminum, is compact, lightweight and easy to move thanks to the base with 12.5 cm wheels. in diameter with brake. It is activated by a system of pulleys and ropes that raise the blade to the desired position. Designed to support mobile gates, bars, shutters and, in general, any obstacle that does not exceed a load of 200 kg. This product includes a practical instruction manual and CE marking in accordance with safety regulations.

HW60D

HW751T

HW816H

HW862

HW874

Weld stainless steel tubes economically and with high quality using the TIG welding procedure: unique in the world, HX orbital welding heads are the best solution for high quality and efficient production thanks to their automated welding technology . Pre-mounted tube elbows (eg in heat exchanger construction), even those in tight bundles of tubes, can be attached to small stainless steel tubes reliably, quickly and safely. The narrow HX headers allow the construction of very compact heat exchangers with a high density of tubess and, therefore, a high degree of efficiency. Its compact design makes it easy to use.

WITH THE COMBINED USE OF MODIFIED ALCOHOL AND AQUEOUS DETERGENT SOLUTION, CLEANING IS PERFECT BOTH IN THE CASE OF ORGANIC AND INORGANIC CONTAMINANTS.

AMOB's MB H range for forming is capable of processing tubes up to 250mm outside diameter (OD), covering a wide range of industrial sectors. The main characteristic of these machines is the hybrid movement control. This means that there's a combination of hydraulic and electrical axes. Produced by default with three automatic forming stations, these machines also have the possibility of being equipped with additional stations and rotary stations for forming and machining. Additionally these range can incorporate a punching station. Machines with greater versatility for the execution of the most complex end-forming jobs. This perfect combination allows servo-controlled hydraulic forming, greater precision due to its exchange of electrical stations and rotary tools with up to 2 axes for applications such as thread opening or burr trimming. The total productive autonomy of the AMOB group provides flexibility when it comes to customizing products for our partners, everything is possible, from simple stations, rotary stations or even a combination of these two types.

We manufacture all types of sealing components for hydraulic and pneumatic cylinders.