Sideros Engineering includes in its producs range innovative Storage Systems for sheet metal, tubes, pipes and bars. All models are custom made according to the available height, number of towers, number of drawers, sheet metal and tubes/pipes/bars lengths. Technology, experience, service and desing have always been the key factors of the Sideros Engineering competitiveness and success.

We produce sheets and rolls of recycled materials such as: PS, ABS, ABS/PMMA

At CONIEX we have more than 30 years of experience in shot blasting surface treatment applications and one of our main values is to pass on our knowledge so that your processes are efficient and profitable. If you need to carry out a sand blasting, scale removal or shot peening process, let our specialists in shot blasting machines, abrasives and processes advise you.

Roller conveyor blast machines are suitable for the descaling, paint stripping, rust removal, roughening, and cleaning of work pieces such as sheet metal plates, profiles, beams, and pipes. Depending on the type of system, thin sheet metal plates up to massive steel profiles weighing several tons can be processed. The largest systems allow optimal processing of work pieces up to 6,000 mm in height and up to 5,000 mm in width. During processing, the work pieces pass through the pre-chamber, blast cabin, and post-chamber of the system – either one after the other or in batches on a roller conveyor. Depending on the type of system, shot blasting is carried out with precisely positioned blast turbines equipped with energy-saving motors. The blasting result is all-round, comprehensive, and always reproducible. Roller conveyor blast machines can be easily integrated into existing production lines. Despite their sometimes considerable size, the systems are easy to maintain because the components can be conveniently reached through large access openings and inspection platforms.

This shower column with mixer tap contains 1 hand-held shower head with 1 spray mode, 1 extendable stainless shower hose, 1 sliding rail that can be adjusted at different heights, 1 overhead anti-scale shower head and 1 mixer tap. The overhead shower head measures 20cm, whereas the hand-held shower head measures 22 x 3cm. The stainless hose shower has a length of 1.5m and the sliding rail has an adjustable length from 80cm to 115cm. This shower column system is very easy to mount and install in your house. It is made of chrome-plated ABS.

Thanks to this casting, we get parts with very high resistance to temperature, such as engine intake pieces. It is a very unique technology since it requires a great level of knowledge and experience by the staff. This technology has a widespread use in automotive. This is achieved due to the following properties of its chemical components: Silicon (Si): Used as a deoxidizing element. It is the fundamental alloying element of the magnetic sheet and that used in electrical applications. Improves resistance to oxidation. Increases hardenability in steels with non-graphitizing elements. Increases strength of low alloy steels. Molybdenum (Mo): Raises the grain growth temperature of austenite. Increases hardenability. It counteracts the fragility of temper. Improves hot strength and increases hot hardness. Increases corrosion resistance in stainless steels. It forms particles resistant to abrasion.

The Si2-LD acoustic imaging camera enables you to detect and reduce leaks in facilities, thereby cutting costs associated with compressed air and specialty gas leaks. Beyond these capabilities, it also identifies mechanical faults, such as bearing issues, facilitating preventative maintenance to avoid downtime. The Si2 series delivers unparalleled performance, enhances decision support, simplifies fleet management, and integrates seamlessly with enterprise data, setting a new standard in its class. Why choose the Si2-LD Camera? Advanced Leak Detection - Detects, locates, and measures compressed air and gas leaks; including bearing fault detection, from up to 200 m (656 ft) away - Built-in measurement and cost analysis for industrial gases including ammonia, hydrogen, CO2, methane, helium, and argon - One-handed operation with automatic tuning, 8x zoom, and a 12 MP digital camera Mechanical Fault Detection - Mechanical fault mode, automatic selection, and optimization of filters simplifies finding critical mechanical issues, such as bearing faults - Packed with Features to Streamline Fleet Operations - Fleet management functionality for efficient tool usage and maintenance across large-scale operations Detecting and quantifying leaks in manufacturing, production, and assembly applications; in all applications using compressed air Early leak detection for enhancing safety and compliance while minimizing costly repairs Rapid, accurate leak detection, boosting efficiency and client satisfaction in compressed air and gas system maintenance Mechanical fault mode to detect faulty bearings to help plan repairs and avoid downtime

The Si2-PD acoustic imaging camera helps you reduce maintenance costs for electrical equipment by offering an effective solution for partial discharge (PD) detection and response. This camera detects, locates, classifies, and assesses PD faults from up to 200 m (656 ft) away, identifying PD issues 30 times smaller than previously possible. It provides on-camera and software-based severity assessments, giving you the decision support needed for precise maintenance decisions. Why choose the Si2-PD Camera? Advanced Partial Discharge Detection - Identify PD 30x smaller than ever before - Fleet Management Functionality - On-camera and software-based severity assessment of PD issues, and PD type classification provides best-in-class decision support Ease of Use - One-handed operation with automatic tuning, 8x zoom, a 12 MP digital camera, and IP54 rating - Made for enterprise scaling through the use of fleet management functionality so that managers can ensure the tools are being used and maintained properly Monitor transmission & distribution conductors and components at long distances easily and reduce need for emergency repairs. Inspect substation transformers to detect PD issues early, before they result in a dangerous and costly explosion. Find PD issues in any piece of high-voltage equipment to reduce public complaints of radio interference and audible noise.

The Si2-Pro camera helps you significantly lower costs associated with mechanical bearing issues and partial discharge on electrical equipment. It also enables you to drastically reduce leaks in your facilities, cutting down expenses related to compressed air and gas leaks. With the Si2 series, you'll experience the best-in-class performance, decision support, fleet management, and enterprise data integration available. Why choose the Si2-Pro Camera? Advanced Leak, Partial Discharge, and Mechanical Fault Detection - Mechanical fault detection for early identification of bearing problems, preventing costly downtime - Quantify leak rate and cost of industrial gas and compressed air leaks, to prioritize repair and calculate savings - On-camera and in-software severity assessment and type classification of partial discharge (PD) issues Ease of Use - Automatic frequency tuning, 8x zoom, 12 MP digital camera,IP54 rating, and a QR code reader - Fleet management functionality for efficient tool usage and maintenance across large-scale operations Ideal for routine inspections and preventative maintenance in various industrial settings. Ensures adherence to safety standards by identifying potential hazards in bearings and gas systems. Aids in managing and reducing operational costs through early leak detection and analysis. Mechanical fault mode to detect faulty bearings to help plan repairs and avoid downtime.

Las bisagras laterales ofrecen un ángulo rotacional de 180 grados. Ofrecen gran seguridad y se montan usando los tornillos especiales suministrados. Disponibles en varios modelos y acabados.

This electronic jig saw of 800W, 0-45° (0-3,000 rpm.), has a laser & LED, 6 variable speeds, and tilted cut ± 45°. This jig saw has a patented keyless automatic system for a quick blade change with T-shank, anti-vibration mechanism, an orbital action with 4 positions, a smooth start-up and a laser guide.

Semi-automatic band saw for cutting solid bars and medium and large profiles dimensions, high performance and optimum cutting precision. The robust structure and arc that slides vertically over two columns, give the machine the rigidity and precision required for the cutting group - Motor power 4 kW - Central motor power 1.5 kW - Electric pump power 0.12 kW - Cutting thickness 1.5 mm - Cutting angle 45° right - 60° left - Cooling container capacity 50 l - Steering wheel dimensioned - Brush device to clean the blade - Machine with automatic rotation for programming angular cuts (only for Special 702 GA) - Digital display of blockage cutting degrees hydraulic (Special 700 DI) - Chip evacuator Accessories on request: - Vertical presser - Oil micro-lubrication (Special 700 - Special 700 DI)

- Hydraulic CNC automatic saw for cuts from 45 ° to the left to 60 ° to the right, in accordance with all CE safety regulations - The device has 60 programs, each one is composed of 30 steps, for a total of 1800 cutting positions, with corresponding piece counter - Operation: material advance, fixed jaw closure, disc rotation and emulsifiable liquid dispensing; lowering the head until the cut is complete. Return of the carriage to the fixed measure, ascent of the head and end of rotation of the saw and supply of coolant. screw opening fixed bank. cycle repetition - Movement of the feeding carriage by recirculating ball screw - Vertical rotation on axis with conical bearing - Flywheel dimensioned - Clamp with rapid approach device - Safety device, on the steering wheel cover, on the control knob, and on the blade - Numerical control quantity and length of cut - Hydraulic control box with cutting pressure regulation - Tensioning of the saw blade obtained by manual rotation of the handwheel and guaranteed by a microswitch - Bimetallic tape 3200 x 27 x 0.9 mm - Cutting thickness 1.2 mm - Material feed stroke 600 mm - Hydraulic control box motor 0.75 kW - 0.09 kW electropump for belt cooling - Possibility of manual and semi-automatic cutting - Machine prepared for movement with a pallet truck - Speed variator from 0 to 90 m/1'